Recent content by ChuMaDD

Need a little help here I am banging my head against the wall :banghead::bang I have a 97 12v, had a no start no crank. Check under hood fuel shut off solenoid didn't pull up, but will hold. So I manually pull it up and try to start but no luck just a single click and see a small spark on the...

Is there a difference between a 2nd gen 12v and 3rd gen oil cooler? I heard from a guy a work (not a trustworthy source) with that one is 5 plates and the other is 7 but the 7 plate one will fit in older blocks helping with the heat exchanging. Just curious don't have any infront of me to look...

Attempted to search this but with no luck :bang The Control Arms from 94-1998 are a 12mm and 14mm correct? and from 99-01 they are 14mm and 16mm? Any help will be appreciated

Has anyone ever heard of or have successfully ran an s400 SX66 68mm .88 A/R with a T-4 as a single? I tried some searching and netted nothing from it. From what I understand this truck is really laggy with this turbo on, I maybe purchasing it soon so I was wondering on whether I should even...

Never had a LB7 before other than injectors being a problem is there anything else I should look out for? I will be trying to get 500-600 hp out of this, other than a built trans and EFI Live is there anything else I would need?

Well it has been almost 6 months since I had the nv4500 off my truck to put in the DD clutch I had purchased. I also replaced the rear main while I was back there, but as I was driving to work today I smelled something like burning oil. As soon as I got to work I looked underneath the truck, I...

I recently found an 84 with the mazda diesel in it. The owner says its running but needs an inspection brakes and tires.... I am not familiar with this mazda engine at all. Does anyone have some insight on what to look for in particular on it? I have read about the water in oil problem and how...

Has anyone ever tried out this product? I had someone ask me about them in the shop today (after I replced the 3rd reman starter) and I had no experience with them, so hoping someone her has

Does anyone have the max allowed axial play on the compressor side for an s364? Sent from of my fancy thinking box

So I went to the dealership today for a recall with my throttle cable off my 96 cause it started to fray again. I received a call about 6 hours later saying that they can't replace my cable without me fessing up $800 in parts plus labor. So my first thought is WTF :soap: ?! I ask the service...

Title says it all, I am looking for one with little to no play ready to bolt on and roll down the street for my 12v.

Any good place to find a throttle cable for 12v 96 nv4500 cummins? Other than the dealership of course. I found a universal one from lokar, has anyone tried them out before, and did you need to modify your bracket for it to work?

Looking to purchase any damaged diesel engines (doesn't matter what manufacturer), blown up trucks, transmissions, differentials. Depending on what it is and where it is located will dictate the price.

Had a problem the other day I had to drive in the city let the truck sit for about an hour while I did my thing. Came back to my truck not starting, it has two new batteries so that wasn't my problem.. Stater was recently rebuilt by me and was cranking over just fine. But I didn't believe I was...

Was in the middle of rebuilding this with my dad before he passed away but $ is tight and need to come up with it fast. The engine is not working at the moment really didn't have much time to troubleshoot it since I was overseas. Body is good interior is fair-good condition. Will post some...