Does anyone know the fuel rail transducer voltage to psi out put for a 6.7 common rail?
The rail pressure sending unit is 5Vdc and it measures linear. So, output would be the following:
Example:
.05v = 0PSI or .05v = 0Mps
0 psi = 0.5v
5800 psi = 1.4v (idle)
26700 psi =...
Hey, Guys.
I'm looking for one of the old Quadzilla RPG gauges with the harness. Mine went out some time ago and I would like to replace it. Quadzilla stopped making them several years ago so finding a used one is going to be my best shot.
Thanks.
So I recently purchased some used leather seats out of 2006 ram 3500 Laramie edition. My plan was to swap them for my cloth seats in my 06 2500 SLT bighorn edition. The seat swap was really easy, all the wiring was plug and play. Prior to the swap I had power driver side and non-power passenger...
Does anyone know the what the fuel rail calibration is for an 06 common rail?
Example: .05v = 0PSI
I know that the sensor transducer is essential just producing volts and when you install a gauge, it converts it into PSI. I wasn't able to find it in the cummins wiring diagram so I thought I...
Needs some help guys. I am changing my gauge setup and I have been looking for a dual gauge to monitor fuel lift pressure and rail pressure. Spa Technique makes several gauges but not one for rail pressure. They make a dual gauge for fuel pressure/oil pressure, that I've heard of people...
Need some help guys. I have a 2006 cummins with 70k on it and the other day when I went outside to start it, the voltage meter was reading about 11/12 volts and my lift pump under my truck was screaming loud like it was running 10,000 Rpms and the volts wouldn't come up to normal operating...
Any one running a gear vedors on a E4OD? Looking for some better fuel mileage out of my 96 powerstroke. Gear vendors claims that It will increase mpg, not sure how that is possible consisdering you are increasing parasitic drag. Found a good deal on a used one and I am thinking about snagging it...
Hey guys,
I'm looking to upgrade my turbo on my on 06. I am looking at the Fleece S463/83/.90/T4 with the steed speed manifold. I'm looking to achevie 500 rwhp and still be a daily driver that is dependable.
Anyone running this setup? Thoughts? What else will I need to up grade other than the...
Hi guys,
Looks like there is a lot a helpful people and information on this forum and I decided it was time to join.
2006 cummins
6 speed
Air dog 150
GDP Intake plenum
Two many gauges to count
Ats manifold
Intake/exhaust
CP3 bag of parts
71k
1996 F350 Powerstroke
Exhaust
Banks trans...