Recent content by Smokin Flatbed

I have a billet triple disc converter from you for my old 47rh(fresh rebuild). Im trying to sell it and had a guy ask if it would fit his 48re? Ive heard the 48 can go in the 47 but not the other way around?

I got a dana 80 out of a 94 3500 detroit locker, yukon 4340 35 spline axles, fresh ring and pinion yukon 410's. Dana 60 front 410's welded carrier, about 5k miles on new balljoints, tierods. would prefer to sell as a pair for 1200. DPC 2200 rpm billet triple disc 47rh converter(fresh) and bd...

The Truck might be sold locally if not ill post it up.. Its about 22-2500rpm on the brake on the low side(high side seen a bit more)with a 410 gear. Had no problems lighting a 75mm charger. I sent it to Phil to be gone through and he freshened it up for me.. Id take a $1000 plus the ride...

The truck is a 05 gmc has 221k miles on it.. my question is i was told that they start havin bottom end problems around 220k miles . Is there any truth to this? Anything else i need to look at? Thanks Scooter

Im steppin up injector and dont want these sittin around. Ive made over 600hp with these. They are a very good injector, smooth power, idle good. Have maybe 10000 miles on them. 400 shipped

94-97 SB hd hyds 2 weeks old maybe 50 miles...$225 Both shifter boots inner one is ripped a little....$75 Clutch and brake pedal....$75 2 stock lift pumps one has 250 miles on it the other had 150k....$50 1st gen intercooler with piping and boots...$150 4" mbrp muffler....$50 5"x48"L flat top...

I made some changes to my truck to make it more friendly for drag racing. Here some videos. this was in 2wd no traction run out of fuel at the stripe. Went 10.0 at 76(had 100+mph wheel speed) with 2.60 60ft. http://www.youtube.com/watch?v=pZNouhFGLYg This one was 4wd with cad unlocked went...

How do I wire the converter and the overdrive. Ive searched but couldnt find nothin. I heard you power one and ground the other two. Which ones are the question.. Thanks Scooter

I got a 5spd with SB 1-3/8 input shaft,SB hyd and the pedals. 175,000 miles. $1850 OBO..

Here is ILLINOISRAMS P-pump 24 valve 1st pull 1st place YouTube - Tim Burtons 99 p-pumped 24 valve Tim wants feedback on his truck Here is my 10th place hook YouTube - Smokin Flatbed in Farmer City Ill post more as I get them uploaded.

I won this one. sled was set heavy and the track was real tight. YouTube - Scooters pull at Decatur,IL I blew the hot side intercooler boot(BD boots) here same sled set even heavier and really tight track. YouTube - Scooters pull at Rossvile

Any body know what material Peter uses make his input shafts.Mine has a mild twist to it now.

But I gave it a shot. all in all I had fun YouTube - Smokin Flatbed in the 1/8th mile Track got cold on this one YouTube - Another try at the 1/8th

Anybody have a clue as to what this is?It looks like it plugs in between the map sensor then plugs into something else and has a power, ground and another eyelet all by it self Thanks Scooter

I went 616/1143 single charger, no water just good ole#2. had fun, we brought 4 trucks,2 just shy of 600 and 2 over 600. met some nice people too. I am working on video and getting the dyno sheet up.