Search results

Is the afc controlled by volume or psi for boost reference? I don’t have the original hose so I just used a 1/8” copper line for the reference or do I need to get the original size? Sent from my iPhone using Tapatalk

I have a question just did the pump swap and fired it up but I don’t have tach,it’s not charging and I don’t have a oil pressure gauge now. I used the right year cam sensor adapter and it has a new sensor put on. Where should I start looking because a few days ago it worked. Thank you guys...

hi guys I have a 02 that I just picked up a 180hp pump, gear, support bracket and case for. The pump is a bare pump no return lines or anything on it, my question is what all am I going to be needing besides, oil feed, injector, and return lines, cam sensor bracket, shut off solenoid harness...

ok im in the need of a new clutch so goin to a dd sb finally, my question is on sb's site they dont list for 1st gens can i use a 94-97 hydro upgrade kit or what will i gain with goin to the 98-02 adjustable hydros? also will i need to clearance the bell houseing any for a dd 3250? is this the...

how can you tell when the front seal is leakin on the fuel pump? the case is clean around the gear and the dip stick has black and a clear spot at the top of the oil.i ask this because im gettin air in the system and tryed bleedin the system but no change just crankin and crankin.all the lines...

When is it time to go to a dd?I got a 13"sb single d 400hp clutch now and with the new motor startin to slip it,I havnt dynoed the new motor yet (nov7th) and after that clutch time is it time for a dd? I do weigh 13k and have big 6x16sticks and a super phat shaft turbo and a little port and...

just got em and my new motor just got a question do i really have to get the machine shop to lower the valve tower at the head bolt height?i hope not cause i aint got no mo money its all goin together tomarrow and goin in the truck friday hopefully any info thanked before i get too far along

ok i got the front cover off takin off the pump cause of a serious leak(one of 2 bolts came loose and took out the oring on the motors side of the ksb while in eufala,ok at the lake)and i was wondering if im right that when you jump a tooth you go clockwise.am i right?

howdy,i dont know anything bout these trucks but a friend has an 07 and has his egr leakin like crazy! is that thing just a heat exchanger or what does it do and how do i fix or where do i get an egr delete kit at.and how hard is it to get to and fix(im used to my 1st gen dodge i got alot of...

ok to start with this i have a shut off cable going to the shut off lever and it had some slack in the cable,so i loosened the nut for the lever(for the bolt head is on the inside of the lever) and tightened the cable up and fallowed that by tightening the lever nut.started the truck and tried...

hi 2nd gen guys im building a 91.5 ve intercooled motor and was wondering when you need to add a cam,mods include super phatshaft 62/71/14 turbo,6x18 sticks,port and polished and 60#valve springs,and o-ringed done to head and for the bottom general rebuild.fuel pump mods afc foot ground...

im buildin a 91.5 ve motor and so far i got a super phat shaft 62/71/14 turbo,a set of 6x18 sticks, lookin at motor rebuild with 60#exhaust springs,port and polished,o-ringed head also decked,and an air dog system with 3/8"line from tank to pump,ats exhaust manifold,coolertubz and a ps cooler.my...

i think this will work

where do i find or get ordered a set of 6x16 first gen buddha power injecters or equivlent?

ok i got a 92 long wheel base 159" and it has 2 beds on it a front bed with welder,bottles,leads,jacks and its made to be kindof light,the back bed all 1/4 deck and tail and 3/16 sides with boxes and a hefty goosneck.my question is how much power is too much for a truck that weighs in a 12k and...