01 qcsb 2.6 truck
White. Paint looks good on the upper half. Has the typical dodge door and lower cab rust starting. Can be easily fixed still.
Has fender flares. Cowl is cut out and firewall is still Intact.
Interior is stripped except for headliner and door pads.
Dash appears stock with added auto meter tach, fp, oil psi, water temp gauges and switch panel/ shut off panel. Wiring needs finished.
Two summit racing seats.
Small non assist brake master cylinder. Needs brake lines plumbed.
I will included all the stock parts with it. (40/20/40 front cloth seats. Bench back seat. Heater core, etc)
6" hoodstack chrome
5gal aluminum fuel cell. -12 feed line, -6 returns.
241 dhd tcase
Nv4500 Kenny's 1 3/8" input. 5th gear removed and girdle installed. South bend hydros.
Dana 60 welded open carrier. Stock axles. Disconnect welded. Ring gear spacer. 4:88 Dana gears. Newer ball joints and axle ujoints.
Dana 80 welded open 37 spline carrier. 37 spline yukon axles. Dana 4:88 gears. Heavy steel diff cover.
0 passes on both r&p
1480 rear driveshaft.
1410 one piece front driveshaft.
Snow plow bracket for weight box attachment. Has 2 optima batteries mounted inside it. All battery cables are there and routed.
Barker style weight box made of all 1/2" plate. Has insulated ice compartment and rule 3700gph pump. Has a broke sheet metal lid, removable dollies for transport, and weight box wheels. Comes with 700lbs of weights. Box is approximately 600-650.
(4) 36" TRUXUS STS mounted on M/T classic II's 16x12's. these tires are like brand new. Both directions are still sharp edged.
Reese style hitch welded in frame. Pt pulling chassis style.
Pt pulling chassis style drawn down solid suspension.
Front suspension stops.
Won't come with an engine unless someone wants a package deal. I will like the engine FS thread when I get it posted.
$13,000
Bryan
I can text pics or any other info aswell.
(330) 503- 19 eight nine.
White. Paint looks good on the upper half. Has the typical dodge door and lower cab rust starting. Can be easily fixed still.
Has fender flares. Cowl is cut out and firewall is still Intact.
Interior is stripped except for headliner and door pads.
Dash appears stock with added auto meter tach, fp, oil psi, water temp gauges and switch panel/ shut off panel. Wiring needs finished.
Two summit racing seats.
Small non assist brake master cylinder. Needs brake lines plumbed.
I will included all the stock parts with it. (40/20/40 front cloth seats. Bench back seat. Heater core, etc)
6" hoodstack chrome
5gal aluminum fuel cell. -12 feed line, -6 returns.
241 dhd tcase
Nv4500 Kenny's 1 3/8" input. 5th gear removed and girdle installed. South bend hydros.
Dana 60 welded open carrier. Stock axles. Disconnect welded. Ring gear spacer. 4:88 Dana gears. Newer ball joints and axle ujoints.
Dana 80 welded open 37 spline carrier. 37 spline yukon axles. Dana 4:88 gears. Heavy steel diff cover.
0 passes on both r&p
1480 rear driveshaft.
1410 one piece front driveshaft.
Snow plow bracket for weight box attachment. Has 2 optima batteries mounted inside it. All battery cables are there and routed.
Barker style weight box made of all 1/2" plate. Has insulated ice compartment and rule 3700gph pump. Has a broke sheet metal lid, removable dollies for transport, and weight box wheels. Comes with 700lbs of weights. Box is approximately 600-650.
(4) 36" TRUXUS STS mounted on M/T classic II's 16x12's. these tires are like brand new. Both directions are still sharp edged.
Reese style hitch welded in frame. Pt pulling chassis style.
Pt pulling chassis style drawn down solid suspension.
Front suspension stops.
Won't come with an engine unless someone wants a package deal. I will like the engine FS thread when I get it posted.
$13,000
Bryan
I can text pics or any other info aswell.
(330) 503- 19 eight nine.
