'08 Ford 6.0 cooling fan question

[Clutch1]

Is there a way to manually turn the engine fan on? My truck idles most of the time and and a/c will get warm when just sitting there. My easy fix would be cool the condensor so the compressor dosnt kick off with high pressure. Is there a ground or voltage wire that I can tap into to manually override this?

 

[jkidd_39]

Ford Truck Enthusiasts Forums - View Single Post - Hooking up high idle w/upfitter switches

Here you go.

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

 

[Clutch1]

I run my pto for my crane so high idle is always on....this is when it gets really warm. I just never hear the fan come on.

 

[lilpooh]

I run my pto for my crane so high idle is always on....this is when it gets really warm. I just never hear the fan come on.

Read post #13.

manual fan control - Page 2 - Ford Powerstroke Diesel Forum

 

[blackcloudCTD95]

Is there a way to manually turn the engine fan on? My truck idles most of the time and and a/c will get warm when just sitting there. My easy fix would be cool the condensor so the compressor dosnt kick off with high pressure. Is there a ground or voltage wire that I can tap into to manually override this?

6.4 fans are left hand thread. ( tune it clockwise to loosen it) you could get a manual fan clutch from a vt365 out of a 4300 international they use the old fashion clutch.

Have you checked the clutch gap on the compressor ? have you cleaned out the oriface tube?

 

[bismic1]

Your 08 is an E-series?