12 valve bullet racing cam

[nickg9785]

I have a bullet racing cam for 12v spec are 184/215 at .050 with 110 lsa has around 3k miles on it no wear at all. Asking $400 shipped. Call or text for pictures 1-631-603-2854 thanks

 

[nickg9785]

Bump

 

[bigsexy7.3]

is it a drop in cam or do you have to machine the pistons?

 

[Cummins12Club]

I would assume drop in for being a 184/215 duration

 

[Headcase98002]

Sounds like a MaxSpool cam. I just ordered the exact cam retarded 5°. It is drop in at OE specs.

 

[TMONEYDIESEL]

Sounds like a bullet cam

 

[TheSilverBullet]

Bullet cam. Drop in. Carry on

 

[not enoughsmoke]

Sounds like a MaxSpool cam. I just ordered the exact cam retarded 5°. It is drop in at OE specs.

Now you know who cuts a maxspool cams

 

[Headcase98002]

Now you know who cuts a maxspool cams

I knew going into this that Greg did not cut his own cams, just didn't know who exactly did. I hope I'm happy with the results.

 

[nickg9785]

Yes drop in cam. Should be installed on a 99 degree centerline

 

[Beat68CST]

Yes, because everyone out there has their own cam grinder, right?!

 

[nickg9785]

bump $300

 

[myusername]

Is this the same cam thats listed on bulletcams.com price list as the "cummins maxspool cam", item number 590000?

 

[nickg9785]

no its not

 

[cummins 12valve]

paypal sent Nick. Thanks bro

 

[cummins 12valve]

Is anyone familiar with these cams? I'm trying to find the installation literature for bullet cams website, when I noticed the grind on the cam says 214/ 260, not 184/215. Only other numbers is grind number 80432 on bottom, with BC on on middle left and then rotating the cam over 180* shows 214/260 with Flo or F10 again center left. If I recieved a cam other than what I was supposed to, I'd like to know before my engine is completely disassembled. If its right, anyone have a link to install literture? Install degree, ect.

 

[Headcase98002]

Maybe this will help.

 

[4thesporty]

Is anyone familiar with these cams? I'm trying to find the installation literature for bullet cams website, when I noticed the grind on the cam says 214/ 260, not 184/215. Only other numbers is grind number 80432 on bottom, with BC on on middle left and then rotating the cam over 180* shows 214/260 with Flo or F10 again center left. If I recieved a cam other than what I was supposed to, I'd like to know before my engine is completely disassembled. If its right, anyone have a link to install literture? Install degree, ect.

Assuming you have stockish internals, then just drop that cam in and line it up dot to dot. You are looking at the duration @ .050 lift...184/215

I just sold this exact cam the other day here in the classifieds.

 

[cummins 12valve]

Thanks headcase and 4thesporty. Makes much more sense now. Sounds like a pretty straight forward install.

 

[WILD_PHIL]

Subscribed.

Back to a Cummins? Looks like it.