lextalionis
user friendly
- Joined
- Aug 20, 2010
- Messages
- 142
to start The turbo is made by Caterpillar it is the low pressure turbo in my current setup together they make 80psi at less then 4k rpms. The turbo was rebuilt close to 8,000 miles ago. I am rebuilding the motor and running a different setup. no in/out shaft play and minimal to no side to side. this was used on a daily driver. turbo is tight.
88mm ind.
117mm exd
T-6 flange
1.56 a/r exh.
tig welded 4 in. v-band on comp. outlet
will send oil inlet fitting and oil drain fitting with charger
1000 buyer pays shipping.
ALL OFF OF A 1994 12V-
-then i have a/c compressor worked till i lost my 134 through a leak at the sensor so i pulled the a/c components to fit the turbo anyway. $55
-condenser like new its about 1 year old tops. $50
-stock pistons clean skirts no scratches pulled from a good running truck 2 weeks ago. make offer
-stock cam. make offer
-stock balancer. make offer
i think thats it for now i may remember and add some more stuff later if you need pictures let me know i will post pics of the a/c parts after class tonight. any questions pm me, call, or text thanks for looking. 254 366 3411
88mm ind.
117mm exd
T-6 flange
1.56 a/r exh.
tig welded 4 in. v-band on comp. outlet
will send oil inlet fitting and oil drain fitting with charger
1000 buyer pays shipping.
ALL OFF OF A 1994 12V-
-then i have a/c compressor worked till i lost my 134 through a leak at the sensor so i pulled the a/c components to fit the turbo anyway. $55
-condenser like new its about 1 year old tops. $50
-stock pistons clean skirts no scratches pulled from a good running truck 2 weeks ago. make offer
-stock cam. make offer
-stock balancer. make offer
i think thats it for now i may remember and add some more stuff later if you need pictures let me know i will post pics of the a/c parts after class tonight. any questions pm me, call, or text thanks for looking. 254 366 3411