24vppump59
New member
- Joined
- Apr 19, 2017
- Messages
- 190
I have a few parts that I bought for a project then went another route.
Brand new Keating billet tappet cover with hardware: $250
Used 625 head studs, 1 torque on them. $750
5x.025 dual fed injectors with harts nozzles: $1100
Manton 7/16 .120 wall pushrods, very low miles: $150
ARP 2000 rod bolts, one torque but never ran: $100
.024 DV's: $100
I'm also parting out an entire running 95 12v engine so if you need parts let me know.
Brand new Keating billet tappet cover with hardware: $250
Used 625 head studs, 1 torque on them. $750
5x.025 dual fed injectors with harts nozzles: $1100
Manton 7/16 .120 wall pushrods, very low miles: $150
ARP 2000 rod bolts, one torque but never ran: $100
.024 DV's: $100
I'm also parting out an entire running 95 12v engine so if you need parts let me know.