Parting out my 2.5 build and cleaning out the shop. I know I’m missing some stuff so I may have more to add later. All parts are for 5.9 unless otherwise noted. Only thing really interested in tradeing for would be 4th gen 6.7 parts. S467.7, FASS fuel system, South bend DxD clutch for G56, 2nd gen swap, Stainless diesel or steed speed 24v T4 exhaust manifold, ARP head studs (prefer 625‘s). PREFER NOT TO SHIP BLOCK AND HEAD, but will ship on buyers dime. All parts are shipped on buyers dime unless we work something out. Parts are located @ 44451 north east Ohio
Air
$700 S475 96x88 1.32 A/R BNIB never installed only opened to inspect.
$600 2.6 S475 not clipped bushed to 2.6 88x96 1.32 A/R. could easily pull compressor cover and install 75mm cover to use in twin setup. Bearings are good.
$50 S400 90* outlet V-band to 4” hose
$100 4” random bends parts pieces intercooler pipeing
$60 Velocity stack (no name) for S400
$900 HTT 2nd gen intercooler A2A
$1200 HTT 64-71-12CM nothing wrong still good and tight.
Fuel
$1100 P 7100 pump 215hp 12 mm pump flows 600cc worked was done by Seth when he was still at DPE have flow sheet from DPE.
$125 P pump throttle linkge
$30 12v injector return line
$50 P pump gear needs sand blasted
Aftermarket engine parts
$2200 Carillo rods
$40 ARP flywheel bolts 1 torque
$300 Hamilton 110lb 24v valve springs
$500 Hamilton 207-220 110 LSA .360 .360 cast cam requires .080-.100 fly cuts
$45 Auto meter tach pick up. No bracket or wiring
$700 Brand new never installed stainless diesel 12vT4 w/ bolt kit exhaust manifol
$400 Pypes STD-006 stack install kit, 36”x7”out x 5” in black angled rolled tip stack new in box.
Drive line
$250 South bend hydraulics for nv4500 new never installed
$225 South bend hydraulics missing pushrod for clutch fork, new never installed.
$400 Richmond power traxx locker dana 80 new never installed
$100 dana 60 spool has some slight surface rust
Stock parts
$600 12v brazil block, crank, 14mm ARP main studs 1 torque, oil cooler, pump, pan (prefer not to ship)
$250 polished 12v rods w/ ARP L-19 bolts 5 england 1 brazil. That’s how I got the set.
$150 12v England rods
$400 07 CR head no visible cracks has not been checked out by machine shop. has rocker arms no valve springs Ithink I have the valves for it still. (prefer not to ship)
$15 (2) 5.9 rear main seal just the seals not plates
$60 stock boots and clamps 94-02
$50 pushrods
$make offer cam thrust plate, tappets
$25 (2) turbo oil feed lines
Air
$700 S475 96x88 1.32 A/R BNIB never installed only opened to inspect.
$600 2.6 S475 not clipped bushed to 2.6 88x96 1.32 A/R. could easily pull compressor cover and install 75mm cover to use in twin setup. Bearings are good.
$50 S400 90* outlet V-band to 4” hose
$100 4” random bends parts pieces intercooler pipeing
$60 Velocity stack (no name) for S400
$900 HTT 2nd gen intercooler A2A
$1200 HTT 64-71-12CM nothing wrong still good and tight.
Fuel
$1100 P 7100 pump 215hp 12 mm pump flows 600cc worked was done by Seth when he was still at DPE have flow sheet from DPE.
$125 P pump throttle linkge
$30 12v injector return line
$50 P pump gear needs sand blasted
Aftermarket engine parts
$2200 Carillo rods
$40 ARP flywheel bolts 1 torque
$300 Hamilton 110lb 24v valve springs
$500 Hamilton 207-220 110 LSA .360 .360 cast cam requires .080-.100 fly cuts
$45 Auto meter tach pick up. No bracket or wiring
$700 Brand new never installed stainless diesel 12vT4 w/ bolt kit exhaust manifol
$400 Pypes STD-006 stack install kit, 36”x7”out x 5” in black angled rolled tip stack new in box.
Drive line
$250 South bend hydraulics for nv4500 new never installed
$225 South bend hydraulics missing pushrod for clutch fork, new never installed.
$400 Richmond power traxx locker dana 80 new never installed
$100 dana 60 spool has some slight surface rust
Stock parts
$600 12v brazil block, crank, 14mm ARP main studs 1 torque, oil cooler, pump, pan (prefer not to ship)
$250 polished 12v rods w/ ARP L-19 bolts 5 england 1 brazil. That’s how I got the set.
$150 12v England rods
$400 07 CR head no visible cracks has not been checked out by machine shop. has rocker arms no valve springs Ithink I have the valves for it still. (prefer not to ship)
$15 (2) 5.9 rear main seal just the seals not plates
$60 stock boots and clamps 94-02
$50 pushrods
$make offer cam thrust plate, tappets
$25 (2) turbo oil feed lines
Last edited:
