dwitt0187
cummins parts guy
- Joined
- Mar 7, 2008
- Messages
- 437
For Sale is a 2003 Dodge Ram 2500 Cummins 4x4 with TWIN TURBOS
Truck Features
leather seats
4wd
NV5600 6 speed just rebuilt with new syncros, bearings, and input shaft and 6th gear
33X12.50X18 nitto terra grapplers on 18x9.5 Pro Comp 6001 wheels
5% Tint
3.73 Gears
Modifications to truck and engine
it has 5 gauges in the cab 2 don't work needs new sending units for the fuel pressure and oil pressure
B&W Turn Over Goose Neck Ball
5" turbo back with 5" down pipe for the twins
Air Dog DF-200 200gph lift pump with air seperation and water seperation
Floor It Stage3 CP3
F1 Flux 4 injectors 200hp
O-ring 06 head
ARP 625 Studs
Hamilton Big Stick Cam
F1 Sportsman Valve Springs
HTT Polished Aluminum Innter cooler
MPI Twin Turbos full polished 64/71/13ss top turbo and a S480 with race cover on the bottom good for 950hp
South Bend Dual Disk Clutch 3600 SFI Rated Flywheel
Smarty TNT/r Programmer good for 4000rpm and make 800+ hp to the wheels.
TST R-49 controller
Amsoil Ran in the Engine and transmission and Diffs
ATS Diff cover on the rear end
This truck has dyno'd 821hp and 1623tq at the wheels.
I drive it everyday and have no problem with it getting hot and I have had no issues with towing with it just have to be smart about how you use the power.
the bad
the a/c does not work
the dash lights do not work but all gauges work and warning lights work just no dash lights.
there is a small amount of rust on the left side bed that could be fixed pretty easy it is not bad.
177K miles.
i will have this truck completely detailed professionally for whoever buys it.
you can text me for pictures or email me and I will send them to you.
eight5nine-445-1453
cumminsforsale@yahoo.com this email is for communicatoin for this sale add.
Price is negotiable
I will Try to get some pictures up in the next day or so.
Thanks,
Danny
Truck Features
leather seats
4wd
NV5600 6 speed just rebuilt with new syncros, bearings, and input shaft and 6th gear
33X12.50X18 nitto terra grapplers on 18x9.5 Pro Comp 6001 wheels
5% Tint
3.73 Gears
Modifications to truck and engine
it has 5 gauges in the cab 2 don't work needs new sending units for the fuel pressure and oil pressure
B&W Turn Over Goose Neck Ball
5" turbo back with 5" down pipe for the twins
Air Dog DF-200 200gph lift pump with air seperation and water seperation
Floor It Stage3 CP3
F1 Flux 4 injectors 200hp
O-ring 06 head
ARP 625 Studs
Hamilton Big Stick Cam
F1 Sportsman Valve Springs
HTT Polished Aluminum Innter cooler
MPI Twin Turbos full polished 64/71/13ss top turbo and a S480 with race cover on the bottom good for 950hp
South Bend Dual Disk Clutch 3600 SFI Rated Flywheel
Smarty TNT/r Programmer good for 4000rpm and make 800+ hp to the wheels.
TST R-49 controller
Amsoil Ran in the Engine and transmission and Diffs
ATS Diff cover on the rear end
This truck has dyno'd 821hp and 1623tq at the wheels.
I drive it everyday and have no problem with it getting hot and I have had no issues with towing with it just have to be smart about how you use the power.
the bad
the a/c does not work
the dash lights do not work but all gauges work and warning lights work just no dash lights.
there is a small amount of rust on the left side bed that could be fixed pretty easy it is not bad.
177K miles.
i will have this truck completely detailed professionally for whoever buys it.
you can text me for pictures or email me and I will send them to you.
eight5nine-445-1453
cumminsforsale@yahoo.com this email is for communicatoin for this sale add.
Price is negotiable
I will Try to get some pictures up in the next day or so.
Thanks,
Danny