2010 Listie Grove Pulling

Diesel Buddy

"Monkey Wrench"
Joined
Jan 27, 2009
Messages
225
Theses are listies 2009 rules... i know there is many people out there that would like to change some of the rules and have a street, 2.6 ,2.8 and a open class.

This thread is only for suggestions...



STREET DIESEL
HOOK FEE $20.00
8,000 LBS.


General Rules Apply


1. A technical safety inspection required before pull.
2. Must be state licensed and inspected and insurance card.
3. Street Diesel trucks must be driven in.
4. Tires must be factory size dot tires 33-12.50.
5. Duals allowed no oversized duals.
6. Stock appearing turbo.
7. NO drugs or water injection #2 fuel only.
8. NO front weights or heavy front bumpers.
9. Factory snow plow or winch brackets (NO winch allowed).
10. Weights in bed only.
11. No weights in cab.
12. No frame or suspension modifications.
13. No suspension add ons, air bags or helper springs.
14. Exhaust should exit rear of truck or vertical stacks behind cab.
15. Reese style hitch, or bumper pulling hitches.
16. No vertical hitches. 3.5 twisted clevis or equivalent opening to allow sled hook. 26” hitch height.
17. No laptops allowed.
18. Driver who fails to hold position in line will forfeit his points for that class.
19. All decisions of officials are FINAL!!!



HOT STREET DIESEL
HOOK FEE $20.00
8,000 lbs.


General Rules Apply


1. A technical safety inspection required before pull.
2. Must be state licensed and inspected and insurance card.
3. Hot Street diesel must be driven in.
4. All electronic tuners, lap tops, data loggers allowed.
5. Tires must be DOT 35-12.50 limit.
6. Duals allowed. No oversized dual tires.
7. Turbo limit 2.6 bushed.
8. Fuel nothing allowed other than #2 fuel only and water/meth.
9. Hanging weights allowed.
10. Weights will be no more than 60” from center of front diff.
11. No weights in cab.
12. Suspension traction bars, blocks, 2” of travel, straps, airbags etc.
13. No solid suspension.
14. Exhaust cannot exit toward spectators. Exhaust must exit to rear of truck or vertical stacks behind cab any diameter.
15. Reese style hitch, no trick hitches, no vertical hitches, 3.5 twisted clevis or equivalent opening to allow sled hook. 26” hitch height.
16. Driver who fails to hold position in line will forfeit his points for that class.
17. All decisions of officials are FINAL!!!



OPEN DIESEL
HOOK FEE $25.00
8,000 lbs.


General Rules Apply


1. A technical safety inspection required before pull.
2. Fire Extinguisher required in cab.
3. Helmets, seat belts, fire suits required.
4. Safety blanket on automatic transmissions.
5. Blow-proof bell housing on standard transmissions.
6. Crank shaft damper shield required unless a SFI damper is used.
7. Kill switch required.
8. Drive shaft loops required.
9. U-joint guards required.
10. All tuners, lap tops, data loggers allowed.
11. Turbo unlimited single or 3.2 atmosphere twin.
12. Hanging weights allowed.
13. Weights will be no more than 60” from center of front diff.
14. Solid suspension allowed.
15. Exhaust anything vertical.
16. Hitch height 26”.
17. Pulling hitches allowed.
18. No vertical hitches allowed.
19. Fuel: Diesel, Nitrous, Propane, water/meth.
20. Driver who fails to hold position in line will forfeit his points for that class.
21. All decisions of officials are FINAL!!!
 
Are these the rules going to be used by Power Pulling Productions, too? Where is Listie Grove located?
 
*bdh*

Why would some one in this area build a 2.8 truck where are you gonna pull in a 2.8 class with out traveling 200miles?
 
Theses are listies 2009 rules... i know there is many people out there that would like to change some of the rules and have a street, 2.6 ,2.8 and a open class.

This thread is only for suggestions...



STREET DIESEL
HOOK FEE $20.00
8,000 LBS.


General Rules Apply


1. A technical safety inspection required before pull.
2. Must be state licensed and inspected and insurance card.
3. Street Diesel trucks must be driven in.
4. Tires must be factory size dot tires 33-12.50.
5. Duals allowed no oversized duals.
6. Stock appearing turbo.
7. NO drugs or water injection #2 fuel only.
8. NO front weights or heavy front bumpers.
9. Factory snow plow or winch brackets (NO winch allowed).
10. Weights in bed only.
11. No weights in cab.
12. No frame or suspension modifications.
13. No suspension add ons, air bags or helper springs.
14. Exhaust should exit rear of truck or vertical stacks behind cab.
15. Reese style hitch, or bumper pulling hitches.
16. No vertical hitches. 3.5 twisted clevis or equivalent opening to allow sled hook. 26” hitch height.
17. No laptops allowed.
18. Driver who fails to hold position in line will forfeit his points for that class.
19. All decisions of officials are FINAL!!!



HOT STREET DIESEL
HOOK FEE $20.00
8,000 lbs.


General Rules Apply


1. A technical safety inspection required before pull.
2. Must be state licensed and inspected and insurance card.
3. Hot Street diesel must be driven in.
4. All electronic tuners, lap tops, data loggers allowed.
5. Tires must be DOT 35-12.50 limit.
6. Duals allowed. (No oversized dual tires.remove) add 96" outside rear tire width limit
7. Turbo limit 2.6 bushed.
8. Fuel nothing allowed other than #2 fuel only and water/meth.
9. Hanging weights allowed.
10. Weights will be no more than 60” from center of front diff.
11. No weights in cab.
12. Suspension traction bars, (add adjustable) blocks, 2” of travel (remove), straps, airbags etc.
13. No solid suspension.
14. Exhaust cannot exit toward spectators. Exhaust must exit to rear of truck or vertical stacks behind cab any diameter.
15. Reese style hitch, no trick hitches, no vertical hitches, 3.5 twisted clevis or equivalent opening to allow sled hook. 26” hitch height.
16. Driver who fails to hold position in line will forfeit his points for that class.
17. All decisions of officials are FINAL!!!



OPEN DIESEL
HOOK FEE $25.00
8,000 lbs.


General Rules Apply


1. A technical safety inspection required before pull.
2. Fire Extinguisher required in cab.
3. Helmets, seat belts, fire suits required.
4. Safety blanket on automatic transmissions.
5. Blow-proof bell housing on standard transmissions.
6. Crank shaft damper shield required unless a SFI damper is used.
7. Kill switch required.
8. Drive shaft loops required.
9. U-joint guards required.
10. All tuners, lap tops, data loggers allowed.
11. Turbo unlimited single or 3.2 atmosphere twin.
12. Hanging weights allowed.
13. Weights will be no more than 60” from center of front diff.
14. Solid suspension allowed.
15. Exhaust anything vertical.
16. Hitch height 26”.
17. Pulling hitches allowed.
18. No vertical hitches allowed.
19. Fuel: Diesel, Nitrous, Propane, water/meth.
20. Driver who fails to hold position in line will forfeit his points for that class.
21. All decisions of officials are FINAL!!!

This may be changed. I think the rest of it is ok.
 
haha see what i got :hehe:

i think we should get rid of the methanol bull stuff...
along with the tires should be dot tires 102" from side wall to side wall for the 2.6 class.

should aloud to be trailered in... if you want people to come to your pulls from lets say 30mins to an hr away and it cant be trailered they wont come... that is the dumbest rule i have ever heard of...who ever made that up needs to stick around the pulling track some more and see how many people break in a nights time.
 
Last edited:
why is water allowed in hot street. In the other thread someone said people dont have the money to meet the safety rules of NADM but they have the cash to put water on their truck. Im not whining or complaining just trying to see the logic.
 
The big money is spent on the charger. Cheap bushing and a $900 charger or $2k plus to pull NADM.
The Meth should be dropped, only water. Tow in rule for Hot Street was never enforced and should be dropped.
 
The Meth should be dropped, only water. Tow in rule for Hot Street was never enforced and should be dropped.

Agreed!




Zach, I beleive the dual wheel track width deserves some discussing, 102" myself, i dont buy! Hell some roads around here you need a permit to operate a 102 wide vehical?
 
i have a srw with dauls... i havnt measured it yet i hope its smaller then 96" i just know its out there... whats the rule about single rear wheel beds with dauls?>
 
i have a srw with dauls... i havnt measured it yet i hope its smaller then 96" i just know its out there... whats the rule about single rear wheel beds with dauls?>

We discussed this a little last night. I'd like to see what NADM is changing for next year before we finalize anything.
 
Well i no my srw with 33 12.50 16 truxus will fit on my 96in wide trailer w no problem.
 
Well i no my srw with DUAL 33 12.50 16 truxus will fit on my 96in wide trailer w no problem
 
Back
Top