2nd Gen clean up 12 & 24v

ericjk42002

CNG TECH
Joined
Sep 17, 2006
Messages
333
NV 4500 change over from a 99 4x4 with t-case

47RH core

stock after cooler (just tested to 50 psi)

60 & 70 3.54 open

8' bed no rot at all

new hx 35 14cm water-cooled

99 24v engine 70k 53 block is cracked (still in the truck) will be sold less turbo,sensors and will have a 12v cam gear installed. You can drive the truck if you like.

8.3 7100 pumps (have 3 ) all under 100k

parting out a complete 94 -----All parts located in Indiana Pa 15701 I will crate-up and drop off at shipping depot..........new owner pays for the ride from there
 
how much do you think it would be to ship the bed? and how clean is it
 
how much do you think it would be to ship the bed? and how clean is it

The bed is off a 94......was removed in 95 to install a flat bed. It got banged up from sitting around, so it would need a paint job. Where you would need it shipped to?
 
What are you looking to get for one of the marine pumps? How do they flow compared to a 913, or are they the same? (sorry, unfamiliar with marine pumps)

Thanks
 
What's the deal with the 47RH? How much? Very interested..... Thanks.
 
i'm converting to stick, so does that include drive shafts and slave, master, bellhousing, shifter, boot, pcm?

and once again how many miles are on parts?

You wont need the pcm, have everything to do a reg cab long bed with a d70 130ish miles....trans is newer style,front & rear shafts, bell, boots, both shifters, fly wheel & clutch, TC gear and hyd's.
 
Back
Top