2nd gen manifold swap

[rubberduck908]

Im doing a 2nd gen manifold swap and I was wanting some ideas or see some pics of how some of you guys fab things up on the intake side of the Turbo

 

[Scooter's Roofing]

mine's just a 4" elbow w/ an AFE filter clamped to it

 

[rubberduck908]

Where did you purchase the elbow? the intake Pipe? was the intake pipe pre cut for the MAF sensor?

thanks

 

[Scooter's Roofing]

it was just a piece of stainless pipe I had, I cut it to fit.

these trucks don't have a MAF sensor... just an air temp sensor. mine's hanging in the inner fender and has been for almost 70k miles

 

[rubberduck908]

See I learn something new everyday ... Thanks bud

 

[jeff115]

I learned to tig on this so dont make fun of the welds

 

[Howling]

Look in my pics for some ideas.

 

[XLR8R]

I tried to tig on this so dont make fun of the welds

Fixed it for ya!

 

[jeff115]

:thankyou2: it has goten better

 

[01smoker]

I used an intake hose from a 95' powerstroke, fits perfect and has all the right bends to squeeze in between the battery box and the alternator. I also use a universal aFe filter. I have a piece of 4" pvc pipe to adapt the filter to the hose. This is where I have my inlet air sensor mounted.