2nd Gen sled pulling and some p-pump 24v stuff

[getblown5.9]

D80 mini spool for 37 spline axles- $350
D80 housing from 02 with disc brakes, brakes will need components replaced but nothing was cut off. Has heavy duty brackets welded to tubes for traction bars. Has LSD carrier for mini spool and 3.54 gears, 1480 yoke, no axles- $500
Pair of 89" long traction bars, 2.25x.375 wall DOM, with ballistic 2.63" bushings- $600
Rear driveshaft for nv5600/271 combo in 2nd gen 1480 series bare, no slip yoke or u-joints- $200
2nd gen hitch with reinforcing-$50
2nd gen bolt in safety hitch- $50
2-2nd gen tailgates pattiot blue- no rust but both have dents. Hinges are good. - $75/pc
4 16"×6" 8x6.5 dually wheels- $100
4 16"×6" 6 lug Budd dually wheels- $100
2 custom 16×10 inside duals for 6 lug hubs. Has mounting for regular 8 lug wheel outside. Heavy but strong- make an offer

01-02 p-pump 24v CPS relocation bracket and sensor-$50
-4an oil line for p-pump feed- $30
V10 manual trans gauge cluster for 6k tach in ppump 24v- $100
12v throttle cable to swap into 24v truck- $25

Have some more parts like PCM, airbag computer, airbags, passenger seat, center console, headlight switch. Random items pulled from 2nd gen when i stripped it. Let me know what you need and I will see what I have.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[getblown5.9]

Throttle cable and CPS relocator- SOLD

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[SKYNYRD]

No one wants your junk. Lol Bump for a good seller!

 

[getblown5.9]

D80 mini spool for 37 spline axles. $300

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[getblown5.9]

D80 axle is sold.

Need to sell the rest of this stuff and get it out of my way.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[getblown5.9]

Have a set of SCS axles 37 spline used for one hook to go with the spool for a SRW 80. Package deal for spool and axles $1200 which is what the axles cost new.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[YOUNG GUNS15]

Will the mini spool work with a truck with 3.54 axles? Dumb question but I'd be very interested in the mini spool if it fits.

 

[getblown5.9]

Will the mini spool work with a truck with 3.54 axles? Dumb question but I'd be very interested in the mini spool if it fits.

As long as you have a trac lock posi (round pin, not triangular) then yes. The gears do not matter.

 

[YOUNG GUNS15]

Bummer, I have an open differential. Thanks for the rely, hope you get it sold!

 

[getblown5.9]

Bump

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[getblown5.9]

Gauge cluster sold

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[jhselkirk]

Noticed the clearance lights from the tailgate in the 1 picture. Still have them and how much if you do? Thanks, John.

Sent from my SM-N910W8 using Tapatalk

 

[getblown5.9]

Can't tell in the pic but the tailgate was hit right on the light. It's dented and the light is cracked.

Sent from my SAMSUNG-SM-G891A using Tapatalk