RollCoal9000
New member
- Joined
- Feb 25, 2019
- Messages
- 99
Setting line pressure in my 48re. Just have it on Jack stands atm, in D at idle I'm seeing 125 psi? When it shifts to third I'm seeing 190. I have the cooler lines looped but that shouldn't affect line pressure. Screw is 1/2 turn from flush.
With the pan off cycling the key the arm goes against the stop then just goes back a hair. Cycling the pedal I have full movement of the throttle valve.
I used a pdd DIY kit on the vb. Everything went together smooth. Goes into all gears fine.
At stall in D I was getting 140.
With the pan off cycling the key the arm goes against the stop then just goes back a hair. Cycling the pedal I have full movement of the throttle valve.
I used a pdd DIY kit on the vb. Everything went together smooth. Goes into all gears fine.
At stall in D I was getting 140.