No! Really don't care that much! You should put it on a dyno so I can laugh at you!
Sent from my DROIDX using Tapatalk
Dyno day is coming right up! Btw, this is not our first build! We have bin there done that with the 4 cylinders!
No! Really don't care that much! You should put it on a dyno so I can laugh at you!
Sent from my DROIDX using Tapatalk
You want to help it grow, then give us more specs on your VE pump.... I don't need technical drawings or blueprints, just more info. Have you run it on a test stand? What does it put out for cc's?? I can respect if you have alot of time and money invested into a pump, and don't want to give away critical info. But just to say you did some stuff and it's amazing is kinda ridiculous.
Good luck cumminsfever. I was seeing 70psi plus with my VE pump also.
This is why I won't expect more than 300hp at this time.
I do assume you were wastegating your little turbo??
I was just using the stock internal gate that I bored out to 1 inch. I've never measured interstage boost or drive pressure though. I had the small turbo gated to 26psi. 300hp on a VE was the number I was shooting for. I got close but never got into the pump.
1 inch gate?? I bored mine out to 7/8th and have it set to 22 psi or so. My 52 is making 35 - 40 psi. I'm shooting for anything over 300hp.
What size injector did you have? What was done to the pump?? I'm assuming fuel pin and gov spring, and turn the fuel screw??