66/74

0

08cummins

New member
Joined
Oct 12, 2009
Messages
247
has anybody ran this size on a 6.7
i'm thinking of useing as my small turbo for a twin settup with an S488 and run the 66 as a single till I get the big charger
the small one will be on a 2nd gen manifold
thoughts,advice thanks
 
There are quite a few running a 66. Do you have aftermarket injectors? I have no first hand experience but from what i've read and heard it'll spool relatively easy. Thats what i'll be running when i get the dough.
 
no injectors yet, just a fass 150
plan on duel pumps then injectors
I have also noticed a few say the 6.7 spools a 66 good
 
I ran my 66/80 with stock fuel system for a while it spooled fine with little to no lag I say you will be fine
 
silver bullet/S4XX makes a nice setup... that's pretty much what source automotive's big twin kit is
 
I ran a 66 for awhile on stock injectors it did just fine, but it did much better with bigger injectors and cp3
 
got my twin kit sold and got my 66 and ready to install when the weather breaks
my ? is the water line that goes to the head off the meatal thing sticking up that has the vent at the top need to be replaced with a 5.9 heater line because i'm going to a second gen manifold
 
You must log in or register to reply here.
Back
Top