9 second wall and advice to help bust through............

that pic with the slips makes me wonder one thing, how do ya expect to breka into the 9's with a thumb up yer a55
 
Looks like another hurdle, After the second pass had some bubbles in the coolant overflow. loaded her up. Figured the worst because im fire ringed block and head... looks like the guess was correct Jeff, cracks on #3 exhaust valve 3 to be exact.... And cracks between every intake and exhaust valve. EGTs hit 1600 at the 1/8 and climb from there to the 1/4. This is a Hamilton hi swirl head ported , polished and has bigger valves. I know all heads will crack given enough egt but are people having better luck with oem castings or are the aftermarket heads cast with better metals? Looking for some input, also looking for a head lol...…
 

Attachments

  • IMG_5252.jpg
    IMG_5252.jpg
    134.4 KB · Views: 0
T-MAN said:
Looks like another hurdle, After the second pass had some bubbles in the coolant overflow. loaded her up. Figured the worst because im fire ringed block and head... looks like the guess was correct Jeff, cracks on #3 exhaust valve 3 to be exact.... And cracks between every intake and exhaust valve. EGTs hit 1600 at the 1/8 and climb from there to the 1/4. This is a Hamilton hi swirl head ported , polished and has bigger valves. I know all heads will crack given enough egt but are people having better luck with oem castings or are the aftermarket heads cast with better metals? Looking for some input, also looking for a head lol...…
Click to expand...

The struggle for the " 12v Fuel Only 9 second timeslip ", is real. $.02

T, you shouldn't say that my guess was correct cause the haterz will feed off that. :blahblah1:

LOL
 
The cause of burbling in overflow tank along with carbon floating at the top.......

:doh:
 

Attachments

  • 23234.jpg
    23234.jpg
    356.3 KB · Views: 0
  • 23242.jpg
    23242.jpg
    181.9 KB · Views: 0
T-MAN said:
No spray, was trying for 9s on fuel only ... then hit the spray.
Click to expand...

Man, you would only need a little spool jet to get into the 9s its almost like you arent spraying it at all. :lolly:

Nobody is asking for four stages of direct port or anything... just the tip is all you need. :cheer:
 
Is that like, come on honey I promise only the tip? Lol you know how that works out ....lmao
 
Gotta give huge PROPS and THANKS to Mr. Zach Hamilton.

:clap: :clap: :bow: :bow: :thankyou2: :thankyou2:

Dude is in Italy with his wife and still finds time to answer a multitude of text messages sent by me, results are new hi swirl head will be in transit.:rockwoot:

THANK YOU SIR! FOR THE SLAMMING DEAL ON REPLACEMENT !

I apologize for taking time away from you and the wife, AND all that DELICIOUS FOOD YOU HAVE TO BE ENJOYING WHILST IN ITALY.

Once again: :clap::bow:
 
I would also like to thank Zach for taking care of me on this... New head and valves are on the way... probably only miss a week of racing. thanks again Zach...
 
You must log in or register to reply here.
Back
Top