Preacher
15 second Ford killer
I need someone to take there crank postion sensor out, its one 10mm bolt, its right behind the left fender well cover in the side of the block. Take it out, feed the 12v ref. 12v and measure the voltage on the low ref side of the sensor. 12v is green, so feed the tab 12 volts with a wire hooked to the battery and alligator clipped to the tab, then use a DMM to measure and see if the low ref. has voltage on it, and if so how much. The low ref is yellow with black tripe, its the middle tab. Thanks guys, you'd be doing me a giant favor