OK12V
New member
- Joined
- Sep 12, 2012
- Messages
- 29
Hi guys. I'm converting my dodge to used Dana 60 F350 knuckles, brakes and hubs. One spindle spun outer bearing. Called junky yards around, nothing. car-part.com - has new one for $450, wow... What's my options? Can you tell by the picture if I can reuse it? Good bearing going in and out pretty easy, almost as easy as second good spindle.
I see some guys use punch on it to hold new bearing better, or locktite of some sort, or even dana 50 spindles the same??? I just don't see ford guys talk about it much. Is that not common?
Appreciate your replies.
[ame="http://s184.photobucket.com/user/oleglittle/media/black%20ram/20140121_131510_zps1f6a6af3.jpg.html"]20140121_131510_zps1f6a6af3.jpg Photo by oleglittle | Photobucket[/ame]
I see some guys use punch on it to hold new bearing better, or locktite of some sort, or even dana 50 spindles the same??? I just don't see ford guys talk about it much. Is that not common?
Appreciate your replies.
[ame="http://s184.photobucket.com/user/oleglittle/media/black%20ram/20140121_131510_zps1f6a6af3.jpg.html"]20140121_131510_zps1f6a6af3.jpg Photo by oleglittle | Photobucket[/ame]