95 12v halfton.

Lower

Lower

New member
Joined
Jan 17, 2010
Messages
788
Changing jobs and wont have time to mess with it.
12Vhalfton pictures by lower_ - Photobucket
cf1a3a15.jpg

95 halfton with a 95 12v and a th400 trans.
Motor resealed and painted. Had 300K+ cant remember exactly
7X0.16 jl machine injectors.
175 pump with 5ks, full cuts and rack plug.
hx55 turbo, 5" exhaust to stack.
Changed all the engine wiring.
Single 5" stack.
TH400 built locally. full forward manual vb, edge racing converter built for the 12v.
B&M prostick shifter
Holley blue pushing to factory lp.
8 Gal fuel cell.
pw pl ps. Has a battery hold down in bed for 2 red tops.
Truck is alot of fun to drive, have a set of 10.5 slicks i will let go with it.
Probably forgot some things...
Never been on the track so I have no idea what it will run. It is alot of fun to drive around though.
Needs a front right fender, and the paint it peeling.
Located in central OK. Clean title.
Will consider trades, 6500obo.
 
stock 9.25 rear. TH400 is a 3 speed non lockup. 3.54 gears. Was building it for the eighth mile.
 
Shot me a email at apollyonrev911 @ gmail I dont know enough post to pm yet.

Interested in trading for a drz sm(super moto) motor cycle plus cash?

Is it drivable as is? What kind of power does it get or have you dynoed it? Also whats that trans rated for HP wise? Rough idea on fuel mileage with that 3 speed?
 
No thanks on the cycle, and it has not been dynoed either.
Forgot to state with the way it sits without driver it weighs 4450#.
 
Th400 would not be a good highway tranny. Would work well for what he built it for though.
 
Shoot me a email or maybe ill get another post and pm you haha.

Noticed a welded rear in your photo, i assume its this truck?

Im wondering how much it would take to make this truck more DD friendly.
assume a 47rh would bolt up to the motor with no big issues?

Might be to much work to make into a nice street/dd, figured id ask. In the market for a 2wd single cab and would love for it to be a SB.

bump and gluck
 
I just got a question for you did you have to change the suspension to handle the 12v? I want to build a 2wd shortbed 12v but haven't got a truck yet. I was just gonna cut the frame to make a shortbed but if it isn't a lot of work I may buy a 1/2ton shortbed and do a swap. O and here's a free bump on a kool truck!
 
I havent changed anything on the front end, the rear has 2" drop shackles to level it out somewhat.
 
The head has never been off the block.
front and rear mains, oil pan, tin cover, tappet cover.
Just didnt want any oil leaks.
The trucks ps and pb work. I rebuilt the vac pump and put on a new ps pump.
This truck can lose lots more weight if someone wanted too.
 
you interested in trade for a 4runner crawler/street rig? im in the tulsa area, i can send you some more info and a link if your interested
 
You must log in or register to reply here.
Back
Top