Tyler Kadlec
New member
- Joined
- Sep 23, 2012
- Messages
- 3
Alright so i purchased the truck with 280k miles running on 14 pushrods, last owner said they were "to short" come to find out it had broken lifters, I replaced all of that and had it running good even with the tranny problems, then one morning it just smokes white, with barely any power, I replaced the injector o-rings and then it ran fine again for about 2 days. Then a loud pop and dumping white and no power, take of the heads and found about 10 out of 16 push rods bent and a dropped valve. Question is, where do i go from here?