air dog fuel pressure gauge

[fluty118]

What's the best place to tap in for fuel pressure on a 12v I installed a airdog 2 so filter housing is deleted and that's where I had it tapped in before is the best that allen headed screw on the air dog itself

 

[explosives87]

You can tap it there of you can buy a inline fuel pressure fitting.

 

[Muddin_dude06]

Get a 1/2" x 1/2" x 1/2" brass Tee, two 1/2" NPT x 1/2" barb fittings and one 1/2" NPT x 1/8" NPT brass bushing. You can just splice that into your fuel line between the pump and the Airdog to put your pressure gauge sensor into.

 

[Timebomb]

I drilled and tapped my banjo bolt going into the injection pump.

 

[01smoker]

I have mine reading from on top of the airdog.

 

[RDPsmoker]

Get a 1/2" x 1/2" x 1/2" brass Tee, two 1/2" NPT x 1/2" barb fittings and one 1/2" NPT x 1/8" NPT brass bushing. You can just splice that into your fuel line between the pump and the Airdog to put your pressure gauge sensor into.

this is how we do it at are shop.

 

[Rods]

I used the adapter that goes on top of the filter housing 5 minute install