Any CAT mechanics on here?

Oh and the frame is the same width as a semi. The 5th wheel I have on it came off a semi and on to the topkick with no mods to either
 
you probly can find someone to flash it but the engine won't last if you don't do the hard iron changes. a 3126 doesn't have a high life expectancy anywayz if it has had the guts pulled out of it. how many miles are on it now? how heavy are you loading it? i could be mistaken but i believe in the topkick chassis it would be a tight fit to go any bigger of an engine for a swap but maybe a c-9 would go into it. they are sleeved so they can be overhauled instead of thrown away when they wear out.

what he said, dont do it without the iron changes. the 3126 was pretty well known for breaking piston rings as is. imo, if the engine that you work all day every day with aint doin the trick, then swing a different engine that will. im all about performance but you dont want to tweak to hard on your machine that makes you money. just ends up costing more in the long run when it wears out faster and you have a bunch of downtime. getting it done slow and sloppy beats not getting it done at all
 
When I worked at CAT I drove a Topkick with a 3116 that was tweaked with no hard parts changed. It would flat out move. We had 3 Freight shakers with 3126's and was told the same thing about hard parts needed to up the hp. Never asked the difference between the 2. Didnt really care being I had the faster truck. lol
 
what he said, dont do it without the iron changes. the 3126 was pretty well known for breaking piston rings as is. imo, if the engine that you work all day every day with aint doin the trick, then swing a different engine that will. im all about performance but you dont want to tweak to hard on your machine that makes you money. just ends up costing more in the long run when it wears out faster and you have a bunch of downtime. getting it done slow and sloppy beats not getting it done at all

Im not really concerned with longevity. Its a toy hauler that gets run a couple hundred miles one way and a couple hundred back home on the weekends. I have a pretty cool hotrod on the trailer and my hauler wont get out of its own way and i cant stand that.
 
If you're going to attempt a power increase with the heui fuel system I would first off make sure you have the biggest stock injectors available for that engine model. Then I would make sure the hpop is operating 100% and that the sensors and regulator working properly. Think of it as a early 7.3 powerstroke and work on it in a similar fashion.
 
What are you wanting to get it up to? My friend that still works at Cat is looking at your s/n right now and seeing what they can do here in NC.
 
Just get the sn for a 350 HP model and have it flashed to that. LOL
 
Its at 210 and I would like it to be 300. I'm not looking for anything crazy as I do know these things are junk
 
My friend is saying that Cat has so many checks in place it is about impossible to flash the ecm without chance of getting in trouble. He said if it was mine he would do it cause he trust I wouldnt come back in 6 months later complaining about my melted pistons but a strangers, no way. But there is ways around it. He can find a used ecm, erase it, enter a s/n from say an emergency vehicle, flash it and sell it to me then if I sell it to the end user it wont come back on him. Make sense? Really makes me appreciate a Cummins. lol
 
My friend is saying that Cat has so many checks in place it is about impossible to flash the ecm without chance of getting in trouble. He said if it was mine he would do it cause he trust I wouldnt come back in 6 months later complaining about my melted pistons but a strangers, no way. But there is ways around it. He can find a used ecm, erase it, enter a s/n from say an emergency vehicle, flash it and sell it to me then if I sell it to the end user it wont come back on him. Make sense? Really makes me appreciate a Cummins. lol

Someone is still going to have to pay for the programing... I work for a Cat Dealer in Alaska. When I flash a re-power into a truck engine, I have to get factory passwords. Once I have the passwords the dealership gets billed for the new flash file and re-power, It has the service tool number and laptop number with the bill from Cat. The dealer is going to come looking for payment from that laptop. Savy lol?

With that said, just tell the dealer you don't care about the risk and will sign a no sue the dealer or cat if I burn this baby down clause.
 
Someone is still going to have to pay for the programing... I work for a Cat Dealer in Alaska. When I flash a re-power into a truck engine, I have to get factory passwords. Once I have the passwords the dealership gets billed for the new flash file and re-power, It has the service tool number and laptop number with the bill from Cat. The dealer is going to come looking for payment from that laptop. Savy lol?

With that said, just tell the dealer you don't care about the risk and will sign a no sue the dealer or cat if I burn this baby down clause.

not exactly. if you wash the ecm first it would be just like if you were flashing a "new" ecm, cat would never know the difference and you would not be billed. we do that on occasion for special customers that dont wanna pay for the rerate.
 
When I worked at CAT I drove a Topkick with a 3116 that was tweaked with no hard parts changed. It would flat out move. We had 3 Freight shakers with 3126's and was told the same thing about hard parts needed to up the hp. Never asked the difference between the 2. Didnt really care being I had the faster truck. lol

a 3116 and a 3126 are totally different creatures. its very easy to just "tweak" a 3116. and there is no way to tell what hp rating you are bumping it up to by just tweaking it, so your not going to find anything to tell you that you need different iron.
 
Someone is still going to have to pay for the programing... I work for a Cat Dealer in Alaska. When I flash a re-power into a truck engine, I have to get factory passwords. Once I have the passwords the dealership gets billed for the new flash file and re-power, It has the service tool number and laptop number with the bill from Cat. The dealer is going to come looking for payment from that laptop. Savy lol?

With that said, just tell the dealer you don't care about the risk and will sign a no sue the dealer or cat if I burn this baby down clause.

I did tell my CAT dealer here in town that I would sign what ever say they aren't at fault if something happens to it and they still said to bad. I just understand why its such a big deal. I own it, its paid for if I want it 1000 hp I should be able to set it there with out having to go ask the great CAT company if its ok if I do something to a truck I own. I'm kinda glad they quit putting engines in trucks. That's really kinda BS but its the way they run their business. I'm glad all the pickups aren't that hard to get into.
 
I work for Cat the corporation not a dealer. I could maybe get a flash if I had a S/N. I'll do some asking around.
 
Someone is still going to have to pay for the programing... I work for a Cat Dealer in Alaska. When I flash a re-power into a truck engine, I have to get factory passwords. Once I have the passwords the dealership gets billed for the new flash file and re-power, It has the service tool number and laptop number with the bill from Cat. The dealer is going to come looking for payment from that laptop. Savy lol?

With that said, just tell the dealer you don't care about the risk and will sign a no sue the dealer or cat if I burn this baby down clause.

He did mention that Cat charges the dealer $250 for the file and the dealer marks it up from there. If none of the dealers are willing to re flash then another ecm is what is needed or someone with pirated software.

Sent from Razr Maxx
 
not exactly. if you wash the ecm first it would be just like if you were flashing a "new" ecm, cat would never know the difference and you would not be billed. we do that on occasion for special customers that dont wanna pay for the rerate.

Im sure there are ways around it. I haven't been willing to loose my job over a flash file yet though...
 
I did tell my CAT dealer here in town that I would sign what ever say they aren't at fault if something happens to it and they still said to bad. I just understand why its such a big deal. I own it, its paid for if I want it 1000 hp I should be able to set it there with out having to go ask the great CAT company if its ok if I do something to a truck I own. I'm kinda glad they quit putting engines in trucks. That's really kinda BS but its the way they run their business. I'm glad all the pickups aren't that hard to get into.

They are just covering there butt. The Dealer and Cat don't want your engine blown up, even if you don't care, it's still bad press... They have made it hard to rerate for that reason alone. But with that said, it is your engine and you should be able to do what you want with it. Try one of these other guys or I can look into it.

Im glad they got out of truck engines to, I hate the little bastages LOL
 
Back
Top