Bw s400sx3 "s475"

[nwpadmax]

Used, about 5 hooks on it and 20 street miles, maybe.

Cast compressor wheel. Some minor leading edge erosion due to running without a filter. I have a new take-off wheel that goes with it so you can run it as-is or swap the new one on there.

83mm turbine, 1.1 A/R divided turbine housing.

Also have another comp cover with the lettering ground off, as well as a 1.25 A/R divided housing...available at additional cost.

$700 to your door in the continental US. PayPal preferred.

 

[Alex43]

What size flange is it?

 

[nwpadmax]

T4.

 

[nwpadmax]

Bump, $600. Or throw me an offer.

 

[augerdickmining]

Pm sent

 

[Kick Start]

What exhaust flange?

 

[nwpadmax]

The exhaust flange is unmodified from stock, but I don't know what that is offhand. Will shoot some pics tonight.

 

[blackmega3500]

The exhaust flange is unmodified from stock, but I don't know what that is offhand. Will shoot some pics tonight.

If it's curved it's full marmon, if it's flat it should be a half. Most shops sell them as half marmons....

 

[Kick Start]

Need phone number

 

[nwpadmax]

 

[nwpadmax]

 

[Kick Start]

Need a number.

 

[nwpadmax]

People, make a serious offer before asking for my phone number...

 

[augerdickmining]

Check your pm's

 

[nwpadmax]

Auger, need to up your ante. Guys are in front of you.

 

[nwpadmax]

SOLD