WICKEDDIESELS
SUPPORTING VENDOR
Alright here is the deal. We have 300 of these, we are still finalizing production grinds. a 198@50 x 0.311 lobe lift on the intake and a 215@50 x 0.305 lobe lift on the exhaust is in the testing phase. This will be a 105 LSA and a 101 ICL. This will maintain the correct base circle, and far less material will be removed than with the factory grind, so hardness will not be an issue.
Custom grinds are available, as well as a semi finished UGL, that you wish to have your cam grinder finish. As cast, to clean them up seems a 215@50 x 315 lobe lift is the maximum.
These are Brazilian cam cores, made in Brazil not elsewhere. It is the 12 valve cam core with mechanical fuel pump lobe.
Semi finished UGL cores will be sold in minimum quantity lots ONLY, price will be very good.
All cams utilize a full length gear snout and are drilled and tapped for a retainer plate.
Front journal radius is incorporated into all cores. Specs will be provided with all finished camshafts, offset cam degreeing keys are also available.
Everything you guys have wanted in a cam is now available. Finished cam pricing will be unheard of!!!!!!!
To all those interested, experimental grinds are available at my cost. If you step up and it works well for you, the grind will have your name. It will be added to our custom list, stating what modifications it is best suited for.
We do have several proven grinds available. As with anyone persuing the maximum available, we have not settled on final grinds and may offer a ton of them. Time will tell where we need to be. You want custom, we have that!
Custom grinds are available, as well as a semi finished UGL, that you wish to have your cam grinder finish. As cast, to clean them up seems a 215@50 x 315 lobe lift is the maximum.
These are Brazilian cam cores, made in Brazil not elsewhere. It is the 12 valve cam core with mechanical fuel pump lobe.
Semi finished UGL cores will be sold in minimum quantity lots ONLY, price will be very good.
All cams utilize a full length gear snout and are drilled and tapped for a retainer plate.
Front journal radius is incorporated into all cores. Specs will be provided with all finished camshafts, offset cam degreeing keys are also available.
Everything you guys have wanted in a cam is now available. Finished cam pricing will be unheard of!!!!!!!
To all those interested, experimental grinds are available at my cost. If you step up and it works well for you, the grind will have your name. It will be added to our custom list, stating what modifications it is best suited for.
We do have several proven grinds available. As with anyone persuing the maximum available, we have not settled on final grinds and may offer a ton of them. Time will tell where we need to be. You want custom, we have that!