Carrillo Rods and Tool Steel Pins

PhillipF

PhillipF

New member
Joined
Apr 7, 2015
Messages
120
I have a set of Carrillo rods with the standard bolts that I ran all last season. They checked out fine by my local machine shop and the bushings still look brand new. Looking to get $2250 shipped for them

I also have a set of Trend Tool Steel wrist pins that are DLC coated (3" length) that I ran last season, they look as if they were never ran. Looking to get $450 for them.
I will get pictures up early next week
 
IMG_3724_zpszdrhldfn.jpg

IMG_3721_zpsoopobgab.jpg

Was told they are 100 grams lighter than stock (per pin), paid $600 looking for $450
 
really dumb question. what cylinder bore size is a 3" pin for? OEM 5.9l?
 
OEM part number 3934048
Length is 2.972" commonly called 3"
Diameter is 1.575"
I believe it is the factory pin for a 12/24v but not a common rail. I was running them in a set of Wiseco forged pistons but I'm going a different direction this year.
 
Thanks for the info! Unfortunately they don't fit my project.
 
Forgot to mention that the rods are clearanced .010 I believe on each side of the cap. Still waiting for the machine shop to send them back to me so I can take some pictures.
 
You must log in or register to reply here.
Back
Top