CR MLS Head gasket in a 12v

[Shambo]

Has any one tried a common rail MLS in there 12V? It looks like it might work?

 

[KingS]

you don't want to use the mls gasket its been done and the stock gasket is the best route with studs

 

[Lostnwalmart]

I think the oil hole for the rockers is in the wrong spot on the mls

 

[1/2TONCUMMINS]

O.E. cummins gasket is the way to go $.02

 

[Lostnwalmart]

The Mls is an oe cummins gasket....:doh:

 

[duck_04]

LOL

 

[Shambo]

I'll have both soon and I'll compare them together and see how they match up. I don't hear of any one blowing a CR head gasket too often if they have studs!

 

[not enoughsmoke]

I'll have both soon and I'll compare them together and see how they match up. I don't hear of any one blowing a CR head gasket too often if they have studs!

They blow alot, studs dont stop them.

 

[khaoskustoms]

An mls gasket is way better then a steel and paper gasket. Generally the only way to "blow" a mls gasket is to physically lift the head.

 

[Shambo]

That is what I'm thinking

 

[wildman6bt]

Just use a copper one! Lmfao

 

[CaptainChrysler]

The oil holes do not line up.