cummins to ford

[smoken5.7olds]

friend is looking for a cummins to ford 7.3 trans any help ????????thank you.

 

[UNBROKEN]

He wants to put a Ford 4R100 behind a Cummins?
If so....call Scott at www.destroked.com

 

[smoken5.7olds]

yep don't know why but not my prob. thanks for the link.

 

[UNBROKEN]

It's very popular for the Cummins/Ford swaps...I almost used the same trans myself.

 

[SINNER]

It's very popular for the Cummins/Ford swaps...I almost used the same trans myself.

goin dodge tranny too?

 

[smoken5.7olds]

thanks rich what the cost any idea

 

[94ttss]

They retail for $795. I have one of Scott's earlier plates in my shop that uses the Dodge starter that I could give you for $495 shipped. The reason he no longer makes them for the Dodge starter is that you have to grind/cut a clearance hole for the starter nose in the 4R100 bellhousing. The new design uses a Ford 6.0 starter and does not require any clearancing on the bellhousing.

If your friend has any questions about the swap pm me and I'll give you my phone number. Also check out my pics for a look at what he's getting into.

 

[blackandstacked]

Out of the box a 4R100 ford trans is a really good durable tranny.

 

[Burner]

Out of the box a 4R100 ford trans is a really good durable tranny.

Yes, floating over 500 HP in front of it will do it wonders.........:doh:

They are junk until built properly. HOT, HOT and moe HOT!

 

[smoken5.7olds]

thank alot guys i'll let him know and se what he has to saw.94 the cummins into an 83chevy was way easier than that. hehe