08cumminssmoke
New member
- Joined
- Dec 29, 2012
- Messages
- 693
1997 Ram 2500 extended cab long bed
Title in hand
Due to a job offer I can't pass up I'm putting my pull truck up for sale. I've owned this truck a little over 2 years after buying it off a member on here.
Motor:
- Fully filled 6.7 deck plate motor
- 3/4 deck plate
- Billet rods with 1/2" rod bolts
- Ductile iron sleeves
- 5/8 bottom end girdle w/ 14mm studs
- Balanced bottom end
- No Limit Manufacturing 14mm head studs
- Ross forged/flycut 6.7 pistons
- Total Seal piston rings
- LSM billet roller cam with cam card
- Roller rockers
- Billet bridges
- Billet front cover
- Billet freeze plugs
- System one oil filter
- Fluidamper
- Fully ported/polished 24v ISB head
- Dry Head (not filled)
- Larger Ferrara valves, locks keepers
- Stage 5 Manton pushrods
Air:
- Holset HX 82 (different options available, will discuss with buyer)
- Joker Fab runner intake
- (2) Frozen boost type 22 with 1.5" inlet/outlet bungs
- Steed Speed Competition T-6 24v exhaust manifold
Fuel:
- CDS built P7100 Ag pump
- 5x.25 24v competition injectors
- .120 fuel lines
- .120 connector tubes
- Waterman 500 pump with dual feed setup
- Adjustable regulator setup with SPA digital gauge.
- Inline CAT fuel filter
- All stainless AN braided fuel line
Driveline:
- Nv4500 with 5th gear removed
- Kennys 3 disc weighted clutch
- Kennys billet input shaft
- Kennys upgraded hydros
- 241 DHD transfer case
- 1410 front driveshaft
- 1480 one piece rear driveshaft
- Cab/Chassis Dana 80
- Welded 37 spline open carrier
- 37 spline Branik/Haisley axles with ARP axle bolts
- 35 spline 4340 front axles
- Yukon super joints
- ARB air locker in front
Others:
- Autometer Boost, EGT, Fuel Pressure, Oil Pressure, Oil Temp gauges
- TS Data logger with fuel pressure, 6 EGT, boost, rpm, wheel speed.
- Front tires 35" sts on 17 eagle wheels
- Rear tires 35" BFG a\t on 16x10 dual real wheels
- Weight box with rollers and (2) Rule 3700 pumps (1.5" Id hose from rule pumps to Intercoolers)
- 6" Grand Rock hood stack kit
- Full interior (headliner, carpet, door panels)
- (2) Racing seats
I'm sure there is lots more I'm forgetting but if you have any question please feel free to call/text 304-fivethreetwo-1nine1zero
$47,000 for turn key truck
Would like to sell as a whole but will split up the motor and chassis, as long as the motor sells first.
https://vimeo.com/141091211
https://vimeo.com/141091292
Sent from my iPhone using Tapatalk
Title in hand
Due to a job offer I can't pass up I'm putting my pull truck up for sale. I've owned this truck a little over 2 years after buying it off a member on here.
Motor:
- Fully filled 6.7 deck plate motor
- 3/4 deck plate
- Billet rods with 1/2" rod bolts
- Ductile iron sleeves
- 5/8 bottom end girdle w/ 14mm studs
- Balanced bottom end
- No Limit Manufacturing 14mm head studs
- Ross forged/flycut 6.7 pistons
- Total Seal piston rings
- LSM billet roller cam with cam card
- Roller rockers
- Billet bridges
- Billet front cover
- Billet freeze plugs
- System one oil filter
- Fluidamper
- Fully ported/polished 24v ISB head
- Dry Head (not filled)
- Larger Ferrara valves, locks keepers
- Stage 5 Manton pushrods
Air:
- Holset HX 82 (different options available, will discuss with buyer)
- Joker Fab runner intake
- (2) Frozen boost type 22 with 1.5" inlet/outlet bungs
- Steed Speed Competition T-6 24v exhaust manifold
Fuel:
- CDS built P7100 Ag pump
- 5x.25 24v competition injectors
- .120 fuel lines
- .120 connector tubes
- Waterman 500 pump with dual feed setup
- Adjustable regulator setup with SPA digital gauge.
- Inline CAT fuel filter
- All stainless AN braided fuel line
Driveline:
- Nv4500 with 5th gear removed
- Kennys 3 disc weighted clutch
- Kennys billet input shaft
- Kennys upgraded hydros
- 241 DHD transfer case
- 1410 front driveshaft
- 1480 one piece rear driveshaft
- Cab/Chassis Dana 80
- Welded 37 spline open carrier
- 37 spline Branik/Haisley axles with ARP axle bolts
- 35 spline 4340 front axles
- Yukon super joints
- ARB air locker in front
Others:
- Autometer Boost, EGT, Fuel Pressure, Oil Pressure, Oil Temp gauges
- TS Data logger with fuel pressure, 6 EGT, boost, rpm, wheel speed.
- Front tires 35" sts on 17 eagle wheels
- Rear tires 35" BFG a\t on 16x10 dual real wheels
- Weight box with rollers and (2) Rule 3700 pumps (1.5" Id hose from rule pumps to Intercoolers)
- 6" Grand Rock hood stack kit
- Full interior (headliner, carpet, door panels)
- (2) Racing seats
I'm sure there is lots more I'm forgetting but if you have any question please feel free to call/text 304-fivethreetwo-1nine1zero
$47,000 for turn key truck
Would like to sell as a whole but will split up the motor and chassis, as long as the motor sells first.
https://vimeo.com/141091211
https://vimeo.com/141091292
Sent from my iPhone using Tapatalk