ecm questions

[DMX4SNX]

how have u guys been relocating the ecm so it will fit with the p pump?

 

[Warpig]

I moved mine back and used the tappet cover bolts.

 

[SmokinRamMike]

x2, just move it back one space on the tappet cover. You need to cut a chunk off the top of the 24v stock lift pump mount to make this possible. Do not remove the bracket and walk away, make sure that bracket goes back on our you will loose oil. Also I could only attach it with one bolt longer then the stock one provided and about a 1/2 inch to 3/4 inch spacer to get it parallel to the block. Hope that makes since.

 

[roachie]

I made a bracket that turned it around to face the engine and mounted to the master cylinder and shock tower.

I used a stock 12v lift pump on mine, wanted more room to get too it.

 

[BgBlDodge]

I made a bracket that turned it around to face the engine and mounted to the master cylinder and shock tower.

I used a stock 12v lift pump on mine, wanted more room to get too it.

Thanks for the idea. I'm using the stock 12v lift pump on my conversion and was wondering where I was going to set the ECM.