Extended wiring harness

[cgp_3852]

I need to extend the harness 18 inches going to my ficm, and pass side injector harness, there is no way around this, it must be extended to go over, or around my intake, my concerns are that it may change the voltage to the injectors.. has anyone done this before??

 

[LReiff]

Yes it can work. A basic understanding of engine control systems is required. PM me if you need info.

 

[12vriviera]

The connectors won't fit between the runners? That would be quite a Bit cleaner running under the intake imo.

 

[SmokeShow]

I think it can work but I agree with riviera, I'd be trying to go through the valley and between the runners if at all possible.

 

[cgp_3852]

i have began splicing, the connectors will not fit between the intake runners, and it is already a pain to get under the intake to take the bolts in and out because of the fuel lines going to and from the cp3.. i considered it, but decided over the top would work best, just not look as nice. thanks for the input

 

[kjp800]

not to be off topic, but do you have any info on your intake?

 

[house]

Zz fab intake