Fleece Cheetah Compound Setup

what size turbine housing is the best for the 369 in the k27/369 setup?
 
DDually said:
I would go bigger than a 72 and bigger than an 1.10 AR on the primary and possibly an external gate on the manifold (I'm not sure what fleece does to the gate on those). In my opinion 650+ on a 12v tow rig is pushing it. They just don't have the tuning for it to keep it controllable. It can be done and others will say it can be done but I personally wouldn't shoot for more than 500hp on a 12v that still tows.
Click to expand...


? I love my 83/1.1 pulls great.. It also spools fast af! That 96.1.32 spools slower than the coming of Christ
 
Ended up picking a FI s476 Et-R 87/1.1. Going to pair it with a 362sxe
 
Looking for some advice on turbine housing size for the secondary. For the 362sxe I can't decide weather to go with a .70ar or a .80ar waste gated t3 housing? What's your guys opinions?
 
As long as you are not planning spinning its guts out with rpm. The .70 t3 gated.
 
.70 gated for sure on a 12v for the power you are looking to make. Brother ran one for years and it spooled super fast!! Started to get really hot above the 750hp mark though.
 
You must log in or register to reply here.
Back
Top