Bobcat698
Pure Diesel Power
- Joined
- Apr 24, 2006
- Messages
- 2,229
1998 Dodge club cab long box.
Interior is gutted and fitted with a race seat.
Power windows do work and are wired into switches in the sheet metal dash.
Rockwell 106 Rear (came out of the original "Rock Hard Ram" truck by HMR)
6.20 gears, spool, good axles (and a used spare set). 1480 billet yoke.
Dana 60 front with 35 spline inners & outers, 6.18 gears with Detroit Truetrac locker.
285/75/15 Rear BFG AT tires on Weld wheels with custom Van Haisley built inner rims (so the inside tires sit right next to the frame).
315/75/16 Cooper ST (original style) front tires on weld wheels.
SCS Drop Box and (zero drag) reverser. 3 sets of gears included.
Front & rear 4 inch .180 wall drive shafts with 1480 yokes.
Pro Bell blow-proof bell housing.
Billet Engine Adapter plate (purchased from Scheid)
To run it you will need: Engine, Clutch, and intercooler setup, along with some sort of weight box built. We started the framework for one, so that will sell with the truck.
Truck was originally from TX and such is rust free.
Cab & Box were both repainted. Body is in great shape.
I have a set of SMT stock ratio V2 rockers and a weighted 5.9L crank I'd possibly consider letting go at a reduced price with the truck, if interested.
$25k OBO. Serious inquiries only. No trades.
Contact Garrett 715-254-1833@Extension 14.
Interior is gutted and fitted with a race seat.
Power windows do work and are wired into switches in the sheet metal dash.
Rockwell 106 Rear (came out of the original "Rock Hard Ram" truck by HMR)
6.20 gears, spool, good axles (and a used spare set). 1480 billet yoke.
Dana 60 front with 35 spline inners & outers, 6.18 gears with Detroit Truetrac locker.
285/75/15 Rear BFG AT tires on Weld wheels with custom Van Haisley built inner rims (so the inside tires sit right next to the frame).
315/75/16 Cooper ST (original style) front tires on weld wheels.
SCS Drop Box and (zero drag) reverser. 3 sets of gears included.
Front & rear 4 inch .180 wall drive shafts with 1480 yokes.
Pro Bell blow-proof bell housing.
Billet Engine Adapter plate (purchased from Scheid)
To run it you will need: Engine, Clutch, and intercooler setup, along with some sort of weight box built. We started the framework for one, so that will sell with the truck.
Truck was originally from TX and such is rust free.
Cab & Box were both repainted. Body is in great shape.
I have a set of SMT stock ratio V2 rockers and a weighted 5.9L crank I'd possibly consider letting go at a reduced price with the truck, if interested.
$25k OBO. Serious inquiries only. No trades.
Contact Garrett 715-254-1833@Extension 14.