Friday July 15th Frankfort, IN truck pull

aggar

aggar

New member
Joined
Aug 8, 2007
Messages
335
Friday night July 15th we're having the Clinton County Diesel truck pull again and we're having a 2.5, 2.6 and 3.0 classes. Diesel trucks only. Rules and payouts will be announced later.
 
We're working on it. Gonna try but it may be just a bit shy of last year but probably still the biggest payout around.
 
It's shaping up to be another big payout pull. We're going to do the Pre-register again. So let me know with the Phone numbers in a message. I'll get rules up this week along with payouts when we finalize the sponsors.
 
Eric Tolle 2.6 765-438-4660, What time does it start? I think Tipton has one that night
 
Last edited:
Starts at 6:30 with the 2.5 trucks then 2.6. Not sure about Tipton.
You're on the list Eric.
 
OK here's the rules and Payouts. IF you meet ITPA, COTPC or BOB rules thne you'll be ok but we will be teching trucks and if you don't meet the rules then you won't pull. Trucks in the money will be reteched after class.

$30 Hook fee non refundable if you don't meet tech.
Payouts are as follows

2.5 1st $1000, 2. $700, 3.$500 4.$300 5.$200 6.$150 7.$100 8.$50

2.6 & 3.0 1st $1200 2.$800 3.$500 4.$300 5.$200

Workstock/2.5 rules
Work Stock Class –
True 2.5” Inducer Bore NO CLIPPED WHEELS / NO BUSHINGS/ NO TAPERED COVERS
.200 MAX mwe Groove
No Hanging Weights (Ballast Permitted)
8000lb Maximum (With Driver)
26” Hitch Height
DOT Tires
No Dual pumps, no compressed gases or Power Adders of Any Kind
Diesel Fuel Only
Traction bars are allowed
Valid Registration and Proof of Insurance Required
Single Wheel Trucks Must Run Single Rear Tires, Factory Dual Rear Trucks are Permitted to Run Dual Rear Wheels

‎2.6 Class Rules.
Hot Street
2.6” Inducer Bore
Minimum 1/8" Protrusion Into Bore
Compressor Blades Must Be Perpendicular to the Shaft
.200 MAX mwe Groove
Hanging Weights are permitted within 60” from axle CL
8000lb max (With Driver)
Driveshaft loops, u-joint shields and bump stops required
Dual pumps are permitted
No compressed gases of any kind
No Water/Meth
26” Hitch Height
DOT Tires
Valid Registration and Proof of Insurance

‎3.0 class rules
Super Street -
3.0” Inducer Bore
Minimum 1/8" Protrusion Into Bore
Compressor Blades Must be Perpendicular to the Shaft
.250 MAX mwe Groove
Hanging Weights are permitted within 60” from axle CL
8000lb max (with driver)
Driveshaft loops, u-joint shields and bump stops required
Dual pumps are permitted
No compressed gases of any kind
Water Injection Permitted No methanol
26” Hitch Height
DOT Tires
Valid Registration and Proof of Insurance
 
Last edited:
Bump again. Less than 2 weeks away guys. Sign up early to make sure you have a spot.
 
Edit for 3.0 rules. No registration or INS needed. Come on guys sign up. Going to be another good pull.
 
Looks like it's going to be great weather for the pull. Come on out. spots still open. I think we're just gonna pull who shows.
 
You must log in or register to reply here.
Back
Top