fordassassin
FordAssassin
- Joined
- Nov 12, 2008
- Messages
- 660
Front is 9.25" and Rear is 10.5" and both have 3.73 gear ratio. Ended up getting a new front and rear axle a while ago to get powdercoated to put under my truck. So now that these are installed, I have my old axles sitting around taking up space. I also have all the stock suspension sitting here.
Basically I have a almost new front AAM axle with 8k on it. It is the front 9.25 AAM axle that I replaced the hubs, all of the inside seals, the shafts and joints. The axle has 3.73s.
Also have a rear AAM axle with 68,000 miles and has 3.73's. The axle locks up with I get on it, so it makes 2 lines. It is the 10.5 AAM axle.
Also have the front steering linkage,rotors, and trackbar with everything for the front end. I will add it all for another $100 bucks. First person with $1,000 can take both the front and rear axle, which is Dodge/Chevy/Hummer/98-Pre Fords. 8x6.5 lug pattern..I will meet anyone in California.
Basically I have a almost new front AAM axle with 8k on it. It is the front 9.25 AAM axle that I replaced the hubs, all of the inside seals, the shafts and joints. The axle has 3.73s.
Also have a rear AAM axle with 68,000 miles and has 3.73's. The axle locks up with I get on it, so it makes 2 lines. It is the 10.5 AAM axle.
Also have the front steering linkage,rotors, and trackbar with everything for the front end. I will add it all for another $100 bucks. First person with $1,000 can take both the front and rear axle, which is Dodge/Chevy/Hummer/98-Pre Fords. 8x6.5 lug pattern..I will meet anyone in California.
