Fuel pressure?

[Hurley]

yeah I meant lift pump, hah. Thanks guys.

 

[Olee Poole]

A1000

What do you have you base fuel pressure set at before boost? How much boost can the reg #13101 take?

Thanks

 

[Olee Poole]

I'm using an Aeromotive regulator. It's boost referenced, but it's not hooked up.

You have a -an fitting out of P-pump for return to Aeromotive reg. or a banjo bolt?

Thanks!

 

[Hurley]

olee- check the fittings thread that's a sticky in one of the sections, there's a banjo-bolt fitting that has -an on the other end

 

[Olee Poole]

Yes sir that's what i want not sure yet if i'm going Banjo bolt to -6 or -8an yet?

I know there a Banjo to -6an.. Not sure if anyone makes a Banjo to -8an? If you see one let me know!

Thanks!

 

[RonA]

Is anyone running one on the street that is down around 25psi at zero boost and ramps up to 45 or so once the boost comes up? The FASS won't live at 45psi all the time so I'd like to run less when it isn't needed. Seems like 25psi cruising with 1 or 2 psi from the primary would be fine, and then ramp up to 45psi by the time you see 20 from the primary with an air pressure regulator allowing a max of 20 psi to the boost reference port.

RonA

 

[DieselLance]

i was driving mine around with a compound FASS set up @ 85PSI......no problems