Getrag 360

[89cumminstd]

I am new to this forum, I recently bought a getrag 360 to swap in my cummins, I have all the parts I need except for the clutch fork which is discontinued, does anybody have one they would sell? Thank you
CompD Mobile Device

 

[Mark Nixon]

That's an ongoing problem with those.

Mark.

 

[thrashingcows]

As Mark said....good luck with the hunt! There are a lot of guys looking for those as well.

You might be better off taking it to a machine shop and see if they can come up with a way to fix it.

 

[Coolguylevi]

http://www.jegs.com/i/Ram+Clutches/798/78100/10002/-1?CAWELAID=1710634555&CAGPSPN=pla&catargetid=230006180000848344&cadevice=c&gclid=CPvUzd7bvsICFQgGaQodUVMAPA

Here you go, get this installed.

 

[oldestof11]

http://www.jegs.com/i/Ram+Clutches/...4&cadevice=c&gclid=CPvUzd7bvsICFQgGaQodUVMAPA



Here you go, get this installed.

Man, you're full of bad ideas.

 

[stackx2]

When I was looking for mine, I found that quad 4x4 had a few brand new oem one's, but IIRC they wanted like $400 for one.

 

[thrashingcows]

http://www.jegs.com/i/Ram+Clutches/798/78100/10002/-1?CAWELAID=1710634555&CAGPSPN=pla&catargetid=230006180000848344&cadevice=c&gclid=CPvUzd7bvsICFQgGaQodUVMAPA

Here you go, get this installed.

And do you think that this would handle the 13" clutch and pressure plate on our cummins motors?

Interesting idea, but not sure if it would be up to the task.

 

[oldestof11]

Don't you remember his post on DTR recently?

 

[89cumminstd]

Thanks for all the input guys. I watched ebay and snagged the first one that popped up hoping to get it all in this weekend.
CompD Mobile Device