Got my new up pipe

[Mooring Product]

FCDP sent me a very nice new up pipe.

What the easiest way to do this and what tools do I need.

Thanks again Adam.

I was thinking of taking off passenger side wheel and plastic shield to get access but then what....

 

[Abrannan19]

you are welcome Pete.

Remove the passenger side wheel and plastic inner fender..you have a direct shot at the up pipe and you will need about 2' of extensions and a case of beer, cuz you will be cussing..its a tight squeeze and a PITA..it would help if you could have a help on top of the motor and you be below or visa' versa'

 

[4x4freak]

need a hand?

 

[bigastrk]

I guess it just depends from vehicle to vehicle but I know I would have been fine without removing the wheel wheel on my ex to do mine. But the 2 foot extension is a must...... Oh and so is the beer cause liked stated above its a tight fit.

 

[snowbound]

Just replaced the bolts that fell out of mine. I was pulling the turbo to recondition it , and maybe it was just me , but I had to unbolt the passenger side of the cab and jack it up. Gives you room up top , especially with the turbo out.

 

[BINGS TRUCK]

I found it alot easier if you remove the down pipe.