Gtx5533r

Lewis6030

Lewis6030

New member
Joined
Mar 5, 2014
Messages
68
New turbo that only has 3 passes on it. 1.00 exhaust housing.
V band has been welded to compressor outlet.

$3300
 
0e21ce1caf63ebeea103a3498ac26aaa.jpg

9c723d03f4537146153016169e291a7b.jpg

c275a839d8b029eceb21488f5f7e76c8.jpg
 
Looks like it has a .69AR company cover right? I assume this is the 91mm comp wheel?
 
I am also open to trade for nv4500 setup. Or 4bt p7100 pump and front cover

Sent from my SAMSUNG-SM-G870A using Tapatalk
 
Bump. Need this thing gone! Anything reasonable will be considered

Sent from my SAMSUNG-SM-G870A using Tapatalk
 
At what rpm does one of these start making pressure. I ran one as a primary , but never as a single.
 
RonA said:
At what rpm does one of these start making pressure. I ran one as a primary , but never as a single.
Click to expand...

I ran a 94mm GTX as a single for 1 race last season. Obviously it depends on the whole setup. Timing, fueling, etc but on my truck, still setup for a GT45 secondary, stalled around 2200 I could build 3-4 pounds on the stall. Then I had to finish lighting it with a .050 jet.
 
I wonder where it start up on a 400 in gas motor. Up and going by 3200 or so would be sweet.
RonA
 
RonA said:
I wonder where it start up on a 400 in gas motor. Up and going by 3200 or so would be sweet.
RonA
Click to expand...

GT55's are pretty popular on stuff like that. It'll probably start to come on around 3000-3500 but I'm sure even cruising, rolling into it it'll be well into the torque curve by 4000. Totally different animal than the big GT55's like the 5541's. Those are relatively slow spooling and don't like to be driven as hard. That 91/131 comp wheel comes in real nice and you can push it a lot higher before coming out of the map.
 
Last edited:
RonA said:
I wonder where it start up on a 400 in gas motor. Up and going by 3200 or so would be sweet.
RonA
Click to expand...
Yea that would be..if I can't get rid of this charger it might end up on our sbf 427 one day. But who knows

Sent from my SAMSUNG-SM-G870A using Tapatalk
 
RonA said:
At what rpm does one of these start making pressure. I ran one as a primary , but never as a single.
Click to expand...
I'm not sure. It's only been ran on a tractor at 3000 rpm so my application wouldn't be very accurate for you

Sent from my SAMSUNG-SM-G870A using Tapatalk
 
You must log in or register to reply here.
Back
Top