cumminspwr11
New member
- Joined
- May 18, 2010
- Messages
- 222
just as the title says. i picked up a ht3b over the weekend and im going to get started with my compound build, im currently running the he351vgt and was planning on hanging the ht3b under it but i havent been able to really find any good write ups on people doing this and how it performs.
i have a wastegate actuator controling the vgt right now as it is and was just going to run the boost reference off the charge pipe from the primary charger so when its pushing X amount of boost the vgt will go full open
im also planning on running an external 38mm wastegate on the hot pipe between the two chargers so i can control the primary, i read somewhere the ht3b runs best around 35psi, can anyone 2nd this?
i have a wastegate actuator controling the vgt right now as it is and was just going to run the boost reference off the charge pipe from the primary charger so when its pushing X amount of boost the vgt will go full open
im also planning on running an external 38mm wastegate on the hot pipe between the two chargers so i can control the primary, i read somewhere the ht3b runs best around 35psi, can anyone 2nd this?