High Maintenance remodeling sale!!!

SEOHPowerstroke

SEOHPowerstroke

Project Developement
Joined
Sep 25, 2007
Messages
498
Dual CP3 kit (wiring, radiator pipe, bracket, black pulley, hardware) $1200

Floor-It Stage II CP3 $1200

Floor-It Stage II CP3 $1200 (both built this past May)

F-1 Flux 8.0 injectors $1000

Maxspool 2.5 camshaft $250

S400 Twins with piping, twin 50mm external wastegates, downpipe, ATS 3 piece manifold, manifold studs, and turbo mounting brackets. I will list turbo specs later, but they are 3.0 and 3.2 inducer turbos. $4500

South Bend Triple Disc Iron Giant III w/4200lb plate load, big input shaft (specific to this clutch) $3500 (was $4500 new) only 14 hooks on it

NV 4500 Transmission $1200 (fresh rebuild before this season)

Dodge 272 transfer case $750

6.7L Head w/ Maxspool Valve Springs, ARP rocker studs, and Maxspool Billet Pushrods, fire ring is cut in head as well $2000

03' ECM $300

03' Wiring Harness $300

Smarty with TNT Revo 4200 RPM tune $600

Dana 60 Moser Axles Shafts: Inner and Outer shafts with Spicer's HD u-joints $750

Dana 60 Moser Full Spool $200

Ford Super Duty Dana 60 modified hubs that now accept 1.5 inch 35 spline axles $200
 
Im sending a guy your way for the dual cp3 kit... how come the big sale?
 
Is it now a P-pumped 6.7? good luck with the sale.
 
morkable said:
Im sending a guy your way for the dual cp3 kit... how come the big sale?
Click to expand...

Thanks Kevin, I'm building it a bit different so I can run more places next year, it doesn't look as though the whole truck will ever sell, so i guess a remoldeling is the best route.

I also have 12 Valve rods with 6.7L CR pistons that have been shaved 65 thou and ceramic coated. Make an offer.
 
Will that cam fit in a 24v? and do you need a core? Let me know I can paypal the $$$ now.
 
will you seperate the rods from the pistons? You may have heard that I had a small catastophe with my engine,, LOL
 
Thanks for the PM's just let me know if you have a Paypal address.
 
Payment sent for cam, Great doing buissiness with you Josh.
 
Here is an update to what is still available

SEOHPowerstroke said:
Dual CP3 kit (wiring, radiator pipe, bracket, black pulley, hardware) $1200 Pending Sale

Floor-It Stage II CP3 $1200

Floor-It Stage II CP3 $1200 (both built this past May)

F-1 Flux 8.0 injectors $1000Sold

Maxspool 2.5 camshaft $250Sold

S400 Twins with piping, twin 50mm external wastegates, downpipe, ATS 3 piece manifold, manifold studs, and turbo mounting brackets. I will list turbo specs later, but they are 3.0 and 3.2 inducer turbos. $4500

South Bend Triple Disc Iron Giant III w/4200lb plate load, big input shaft (specific to this clutch) $3500 (was $4500 new) only 14 hooks on it

NV 4500 Transmission $1200 (fresh rebuild before this season)

Dodge 272 transfer case $750

6.7L Head w/ Maxspool Valve Springs, ARP rocker studs, and Maxspool Billet Pushrods, fire ring is cut in head as well $2000Sold

03' ECM $300

03' Wiring Harness $300

Smarty with TNT Revo 4200 RPM tune $600

Dana 60 Moser Axles Shafts: Inner and Outer shafts with Spicer's HD u-joints $750

Dana 60 Moser Full Spool $200

Ford Super Duty Dana 60 modified hubs that now accept 1.5 inch 35 spline axles $200
Click to expand...
 
Turbo specs are:

76/74 with .90 AR and

80/88 with 1.32 AR

with twin 50mm external wastegates
 
Can't seem to find a dual kit from Wicked. Are you sure about this? Is it possibly Lloyds Evil twin kit?
 
You must log in or register to reply here.
Back
Top