HT80

juiced95CTD

juiced95CTD

Endless Addiction
Joined
Mar 31, 2009
Messages
242
I have an HT80 I need gone.. bought it rebuilt, put it in a compound set up on a Ppumped 24v and ran right around 200 street miles and 4 strip passes. Parted truck out and sold everything else, but this thing has been on my shelf for little over a year now. Id be willing to trade for 06 Cummins performance parts, or $1000 shipped.
 

Attachments

  • HT80_8.jpg
    HT80_8.jpg
    66.1 KB · Views: 0
  • HT80_7.jpg
    HT80_7.jpg
    23 KB · Views: 0
  • HT80_5.jpg
    HT80_5.jpg
    101.1 KB · Views: 0
  • HT80_4.jpg
    HT80_4.jpg
    80.7 KB · Views: 0
  • HT80_9.jpg
    HT80_9.jpg
    64.2 KB · Views: 0
You can also text me for a quicker response. (406)570-8973

located 44646
 
I'll measure today. I know I have before, lost it along the way though.
 
Generaly ht80's are 92mm inducer 144mm exducer. Turbine should be 104mm exducer 127mm inducer.
 
This is a 90mm but the turbine sounds right. It will b early evening til I can get exact #s but I'll have them tonight
 
man this would be sweet to have on the dirty and hear her sing along with the toyhayler
 
Sorry guys! Had problems with my truck last night and then last second I went snow boarding tonight and forgot ALLLLL about it until now. I WILL get the exact numbers tomorrow. The exhaust housing is a 42cm. I had this with a s475 on a ppumped 24v and the thing was nuts! But then plans changed dramatically and the truck was parted out.
 
With that housing it is probably a G trim turbine, and compressor is probably a 88/137.

I gave under $400 for mine, guess I got a hell of a deal.
 
Gs! I talked to another guy on here that had one that sold to a buddy for 650 and said 1000 would be a good starting point. I'm open to offers though, not dead set on a grand!
 
motorwood said:
Generaly ht80's are 92mm inducer 144mm exducer. Turbine should be 104mm exducer 127mm inducer.
Click to expand...

I must have an odd bastard then, but mine is the same part number as this turbo and it has a G trim turbine and the compressor measures 88/139.
 
Ok- I was off on compressor side. It is infact 5.75" ( 146mm) exducer and 3.625" ( 92mm) inducer. I could have sworn it was a 90mm. Motorwood was right first time around. I have no mic so I'm trying to measure as close as I can. I decided to remeasure and I was wrong. My apologies.
 
I should just take it to work with me and use their mic and be done once and for all trying to tape it out ha!
 
Here they are- OFFICIAL #'s. Decided to quit being lazy and take it to work and get it measured. 90/140 compressor wheel 110/127 exhaust wheel. How about offers?
 
How about this... I'm looking for common rail performance parts still, here are a few things I'd entertain trade ideas for : 188/220 cam, extreme duty push rods, valve springs?
 
You must log in or register to reply here.
Back
Top