HX40 Flange Dimension/V-band Gasket?

[NickTF]

http://nyppd.com/all-parts/nyppd-3-5-in-v-band-metal-gasket-stainless-steel-3-1-2-inch/

I can't seam to find the ID and OD of an hx40 v-band flange. Can someone provide those dimensions or a link to them. Think the gasket in the link above will work for an hx40 hot pipe? Thanks.

Gasket dimensions:
Outer Diameter: 4.3" inch / 109 mm

Inner Diameter: 3.545" inch / 90.05 mm

 

[straight 6 roar]

I drafted this up a couple years ago, had it machined and it's working great. Although I think most companies use more like 3.60" as the base diameter before the flange flares out.

 

[NickTF]

Thanks! I think the gasket I linked to will work if I grind down the OD to ~4.0" to avoid interference with the clamp.

 

[NickTF]

The gasket I linked to is just what the Dr. ordered, looks to have completely eliminated the tiny leak I had there. I did need to grind the OD down to clear the v-band clamp but after that was done it worked/works like a dream!

 

[diesel_importer]

Good deal! Those pesky leaks can get to you sometimes.