Injection lines

[SuperiorRam]

I'm trying to find the six injection lines to convert my water to air aftercooled rotary engine to a p7100.

I found a picture of a engine with that setup so it's out there somewhere the serial number is 69734587 but the guy I talked to at n power said its not a p but rather a denso pump and couldn't tell me that the lines will match up to a p7100?

The line part numbers are
1. 3926450
2. 3926451
3. 3926452
4. 3926453
5. 3926454
6. 3926455

It may be easier to just find a 5.9 with the water to air and a p-pump for the correct part numbers but I would think that these would work but I know your the best so...

 

[Snedge]

I don't believe those lines will work on the p-pump. Let me do some digging.

 

[SuperiorRam]

Thank you very much!

 

[Snedge]

Thank you very much!

Your injectors may be an issue if we can find the lines. Measure the nut on the injector end of the high pressure line. I bet the are the smaller one. (12mm thread)

 

[9724VF350]

3930739
3930740
3930741
3930742
3930743
3930744

 

[Snedge]

Those numbers lead me to a P3000 pump? Not sure the lines are the same.

 

[9724VF350]

Those numbers lead me to a P3000 pump? Not sure the lines are the same.

They are for a 3000, but they work. Not sure what the difference actually is.

Here they are attached to a 913 pump off a Dodge.

[/URL]

 

[Snedge]

Case closed.

 

[SuperiorRam]

Thanks guys!!!!

 

[SuperiorRam]

Jeff could you pm me a quote for the lines I have a return and lots of hold downs shipping will be to 55792
Thanks again

 

[PRINCETON_JAKE]

I have some aftermarket oversized lines that can be bent to fit probably.