forcefed6.4ford
PSN Ex-Pat
- Joined
- Oct 11, 2010
- Messages
- 50
Hey guys. Im new here and to cummins. I'm doing a conversion and am curious to see what you guys figure my build should put out approximately based on the mods listed.
05 cr
balanced rotating assembly
62/71 phat shaft over S475
85% CP3
90hp injectors
165 airdog
All controlled with a smarty s-06
studs but no rings waste gate set for 65psi.
Pushed though a built suncoast allison
When I decided to pull the trigger on the swap I was looking for a strong tow rig that will handle the hp that my 6.4 wont, while maintaining reliability.
I have heard some numbers but want to see what you guys figure it will make.
05 cr
balanced rotating assembly
62/71 phat shaft over S475
85% CP3
90hp injectors
165 airdog
All controlled with a smarty s-06
studs but no rings waste gate set for 65psi.
Pushed though a built suncoast allison
When I decided to pull the trigger on the swap I was looking for a strong tow rig that will handle the hp that my 6.4 wont, while maintaining reliability.
I have heard some numbers but want to see what you guys figure it will make.