rydnhi4x4
New member
- Joined
- Apr 30, 2010
- Messages
- 5
Had a light bracket break on me when I was re-tightening it and I am sure some of you remember when I bent the hell out of the bumper bracket a while back. After looking at the lighting bracket I noticed it had rusted right through the stuff that's supposed to be just like Line-X.
So as you can tell by the pics and vids I decided to pull the bumper off and strip it. My intentions were to have it sand blasted and re-sprayed by real Line-X until I seen all the rust. So I called IronBull and left them a message asking to talk to Jesse the Vice President. Mind you that I called him them day before and he pretty much didn't wanna back his product.
Just as a reminder i have not even had this bumper a full 2 years yet.
So after talking to Bill from IronBull who cleans up Jeese Baldwins **** he offered me the new style bumper only costing me $350 in shipping. I get the new and low and behold the bumper does not inlcude mounting hardware(nuts/bolts). Lucky enough I still had the stuff from the last bumper. So here I am sitting in the driveway trying to mount this thing and oh my god, what a pain in the ass. You will see the huge spacers I had to install just to make it look level.
As for Jesse Baldwin this guy has sh it ty service for a business owner and I hope he never sells another bumper.
Bumper :: MOV01971.flv video by rydnhi4x4 - Photobucket
Bumper :: MOV01972.flv video by rydnhi4x4 - Photobucket
Bumper :: MOV01970.flv video by rydnhi4x4 - Photobucket
Bumper :: MOV01967.flv video by rydnhi4x4 - Photobucket
Bumper :: DSC01969.jpg picture by rydnhi4x4 - Photobucket
Bumper :: DSC01968.jpg picture by rydnhi4x4 - Photobucket
Bumper :: DSC01978.jpg picture by rydnhi4x4 - Photobucket
Bumper :: DSC01976.jpg picture by rydnhi4x4 - Photobucket
So as you can tell by the pics and vids I decided to pull the bumper off and strip it. My intentions were to have it sand blasted and re-sprayed by real Line-X until I seen all the rust. So I called IronBull and left them a message asking to talk to Jesse the Vice President. Mind you that I called him them day before and he pretty much didn't wanna back his product.
Just as a reminder i have not even had this bumper a full 2 years yet.
So after talking to Bill from IronBull who cleans up Jeese Baldwins **** he offered me the new style bumper only costing me $350 in shipping. I get the new and low and behold the bumper does not inlcude mounting hardware(nuts/bolts). Lucky enough I still had the stuff from the last bumper. So here I am sitting in the driveway trying to mount this thing and oh my god, what a pain in the ass. You will see the huge spacers I had to install just to make it look level.
As for Jesse Baldwin this guy has sh it ty service for a business owner and I hope he never sells another bumper.
Bumper :: MOV01971.flv video by rydnhi4x4 - Photobucket
Bumper :: MOV01972.flv video by rydnhi4x4 - Photobucket
Bumper :: MOV01970.flv video by rydnhi4x4 - Photobucket
Bumper :: MOV01967.flv video by rydnhi4x4 - Photobucket
Bumper :: DSC01969.jpg picture by rydnhi4x4 - Photobucket
Bumper :: DSC01968.jpg picture by rydnhi4x4 - Photobucket
Bumper :: DSC01978.jpg picture by rydnhi4x4 - Photobucket
Bumper :: DSC01976.jpg picture by rydnhi4x4 - Photobucket