Jordank520
New member
I recently built a p pumped 24v and I’m curious if anyone would have a ball park range of what power it could make. When I had my vp I made 632/1138 on a wire out motor. Current specs on new motor are
24v block bored .20 over
110# valve springs
160hp p7100
4GSK
Rack plug
Torq tek over flow valve
191 delivery valves
No fuel plate
AFC starwheel messed with (buddy with a 12v did it not sure what he exactly did.)
Timing is at 22.5*
7x.14 injectors
66 over s475
Airdog 150 with a 40# spring
It’s pretty quick but I thought it seemed to have more power when it had a vp on it
It does start breaking up alittle over 2500 rpms while free reving it, hoping that it’s my 4GSKS not adjusted properly could be wrong
24v block bored .20 over
110# valve springs
160hp p7100
4GSK
Rack plug
Torq tek over flow valve
191 delivery valves
No fuel plate
AFC starwheel messed with (buddy with a 12v did it not sure what he exactly did.)
Timing is at 22.5*
7x.14 injectors
66 over s475
Airdog 150 with a 40# spring
It’s pretty quick but I thought it seemed to have more power when it had a vp on it
It does start breaking up alittle over 2500 rpms while free reving it, hoping that it’s my 4GSKS not adjusted properly could be wrong