ISO PCS and valve body

G

Green2015

New member
Joined
Dec 21, 2015
Messages
379
Looking for a PCS and suncoast valve body setup for 48re . Looking to buy sooner then later. The newer the better.
 
Yeeeea boiiii pcs train a rollin!!!!

Good luck bud, try to find a 2000 controller if you can they are a little more user friendly
 
I know nothing honestly about it just exhausting options to stay away from fmvb constantly shifting on hot street truck.
 
I know you stated you were looking for a suncoast unit, but if interested I have a ATS standalone vb/pcs with wiring etc etc. Vb still in the box from when I pulled it and sent it in for cleaning at ATS.
 
I’ll have to pass on that one. I can’t risk a $10k transmission on ATS misfortune.
 
Check into the firepunk anteater also. I am running the pro model and highly recommend it, very user friendly.


Sent from my iPhone using Tapatalk
 
I’ve not seen great results yielded from their setups. Anyone I’ve dealt with that has ran them has had issues and addressing the issues on the customer service side was a mess at times. This is going on a hot hot street truck not simple plug and play setup. So more in-depth parameters are needed for functionality
 
I have a PCS TCM-2000 and a PCS TCM-2800.

2000, $450 shipped
2800, $575 shipped

I bought them with intentions of running Ford autos behind my Cummins engines but have since decided to run manual transmissions. You will have to get your harness from PCS or a dealer of theirs.
 
clifdawg said:
I have a PCS TCM-2000 and a PCS TCM-2800.

2000, $450 shipped
2800, $575 shipped

I bought them with intentions of running Ford autos behind my Cummins engines but have since decided to run manual transmissions. You will have to get your harness from PCS or a dealer of theirs.
Click to expand...

So $500 for something that doesn’t have a harness? Seems like I could buy new for $700 with harness when I checked with on 2000 model with software and pc usb hook ups.
 
Green2015 said:
So $500 for something that doesn’t have a harness? Seems like I could buy new for $700 with harness when I checked with on 2000 model with software and pc usb hook ups.
Click to expand...



No, $450 for the 2000, not $500. Or $575 for the 2800, not $500. You cannot get the 2000 from PCS anymore but I believe you can still get the harness built to order.

As to $700, once again your numbers are incorrect. When you could get the 2000, it was $750 for the box, and then the harness that was specific for your transmission was extra. For the TCM 2800, you’re looking at even more for just the box and then the harness is extra.
 
clifdawg said:
No, $450 for the 2000, not $500. Or $575 for the 2800, not $500. You cannot get the 2000 from PCS anymore but I believe you can still get the harness built to order.

As to $700, once again your numbers are incorrect. When you could get the 2000, it was $750 for the box, and then the harness that was specific for your transmission was extra. For the TCM 2800, you’re looking at even more for just the box and then the harness is extra.
Click to expand...

No one again your wrong. I found them for $790 shipped. With harness and software and hookups. Why would I spend $500 on a box that they don’t even sell a harness anymore ? Pointless. They have them on PATC.com for $790 and with a 10% off discount so about $700 shipped. I’d post a picture it at this point it would be pointless arguing a correct and valid point.
 
Done called yesterday and they said they could get wiring harness specific to my needs for same pricing. But to buy a harness separate it was
gonna be over $200.
 
Yeah try to find a suncoast built harness and vb...just less hassle.
 
You must log in or register to reply here.
Back
Top